Mode II fracture of an MMA adhesive layer: Theory versus experiment
نویسندگان
چکیده
Thick adhesive layers have potential structural application in ship construction for the joining of a composite superstructure to steel hull. The purpose this study is develop mechanics model fracture such lap joints under shear loading. Modified Thick-Adherend-Shear-Test (TAST) specimens made from MMA-based and adherents are designed fabricated. Crack initiation growth these measured monitored by Digital Image Correlation (DIC). An attempt use cohesive zone predict magnitude strain across layer both at crack peak load, extent as function layer. ability several features specimen failure assessed case an high ductility.
منابع مشابه
Elastic-plastic Mode-ii Fracture of Adhesive Joints
A numerical study of the elastic-plastic mode-II fracture of adhesive joints is presented in this paper. A traction-separation law was used to simulate the mode-II interfacial fracture of adhesively-bonded end-notched flexure (E.N.F.) specimens loaded in three-point bending, with extensive plastic deformation accompanying failure. The fracture parameters for the traction-separation law were det...
متن کاملMixed Mode Fracture Toughness of an Adhesive Bonded Joint
Adhesive joints are continuously emerging as candidate to replace traditional fastening systems, such as riveting or welding, in primary structural applications. A wide class of components belonging to electronic, automotive and aerospace industries contains adhesive joints, however, the reliability during service constitutes a major technical problem as these contain flaws. Therefore, their us...
متن کاملPrediction of Mode II of Fracture Toughness in Laminate Composites
In this paper, effects of ply orientation of adjacent plies with (ϕ//θ) interfaces on mode II critical strain energy release rate (fracture toughness) of multidirectional (MD) laminate has been studied. Ply orientation of adjacent plies is one of the most important parameters affects the mode II critical strain energy release rate () in the initiation of the delamination. To study this paramet...
متن کاملFracture Resistance and Failure Mode of Endodontically Treated Premolars Restored with Different Adhesive Restorations
Introduction: The restoration of endodontically treated teeth is a topic that has been studied extensively but it is still a challenge for dental practitioners. The aim of this study was to evaluate fracture resistance, fracture patterns and fracture location of endodontically treated human maxillary premolars restored with direct and indirect composite resin and ceramic restoration. Methods: E...
متن کاملEffect of Rock Fracture Filling on Mode I and II Fracture Toughness
This paper focuses on some fracture toughness tests performed on the pre-cracked Brazilian specimens of rock-like materials. Also the effect of rock fracture filling on the fracture toughness was considered experimentally. Fracture toughness is a key parameter for studying the crack propagation and fragmentation processes in rock structures. Fracture mechanics is an applicable tool to improve ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: European Journal of Mechanics A-solids
سال: 2021
ISSN: ['1873-7285', '0997-7538']
DOI: https://doi.org/10.1016/j.euromechsol.2020.104133