Mixing of dye in a model scald tank

Mixing of dye in a model scald tank.

A model scald tank was constructed to study the mixing pattern of water in a poultry scalding system. Tank dimensions were approximately 6 m long by 10.5 cm wide with a water depth of 18 cm. Water was vigorously agitated with compressed air delivered through a 1.9-cm polyvinyl chloride pipe on the bottom of the tank. Food coloring was added to the tank at a single point, and water samples were ...

Compartment Mixing Model in a Stirred Tank Equipped Dual Rushton Turbine

A Study on Liquid-liquid Mixing in a Stirred Tank with a 6-Blade Rushton Turbine

The turbulent flow field generated in a baffled stirred tank was computed by large eddy simulation (LED) and the flow field was developed using the Sliding Mesh (SM) approach. In this CFD study, mixing times and power number have been determined for a vessel agitated by a 6-blade Rushton turbine. The predicted results were compared with the published experimental data. The satisfactory results ...

Heat Transfer Correlation for Two Phase Flow in a Mixing Tank

Mixing tanks equipped with mechanical stirrer are broadly applied in chemical and petrochemical industries, due to their variety of industrial process requirements. In this study, helical single blade mixer was designed applying CATIA and then mixing of fluid and solid particles, in a tank with this agitator was examined by OpenFOAM. For velocity distribution in the mixing tank, continuity, mom...

[Establishment of skin scald model in mice].

OBJECTIVE To establish the model of skin scald in mice for the study of skin thermal injuries. METHODS After anaesthetization mice were scalded in a 1 cm-diameter circle area on the central dorsum by boiling water at contact times: 10s or 25s. The mice were sacrificed at 1, 3, 5, 7 and 10 days after scald. The skin samples were collected and analyzed by gross and histopathological examination...