Mineral Additives Based on Industrial Waste for Modifications of Bitumen Polymers
نویسندگان
چکیده
The increase in cost of carbonaceous materials, as well significant costs industrial waste, have prompted scientists to use alternative raw materials components the construction industry. This study investigated suitability waste products from coke industry modifying agents for polymer bitumen. by-product coking reaches a high level silicon and is called silicon-containing additive (SCA), composition which similar mineral solutions In this article, results using SCA standard additives modified polyethylene terephthalate (PET) with bitumen presented. Using Simdist boiling point distribution method, simulated temperature distillation by gas chromatography, differential thermal (DTA) analyzes, other methods physic- chemical properties after adding were studied. It was revealed that connection consumption occurs because content aromatic components, an characteristics. Thus, presented method obtaining road surfaces based on PET production meet requirements sustainable development, implements both secondary their processing into new product energy-saving technology reduces resources.
منابع مشابه
Rheological properties of modified Bitumen: Comparison of waste polymers’ performance
In this investigation, rheological properties of three different polymer-modified bitumen compounds containing recycled polyethylene terephthalate (R-PET), crumb rubber (CR) and poly (styrene-butadiene-styrene) (SBS) are evaluated and compared. The modified samples were tested by a dynamic shear rheometer (DSR) where complex modulus (G*), phase angle (δ) and rutting resistance (G*/Sinδ) of spec...
متن کاملapplication of upfc based on svpwm for power quality improvement
در سالهای اخیر،اختلالات کیفیت توان مهمترین موضوع می باشد که محققان زیادی را برای پیدا کردن راه حلی برای حل آن علاقه مند ساخته است.امروزه کیفیت توان در سیستم قدرت برای مراکز صنعتی،تجاری وکاربردهای بیمارستانی مسئله مهمی می باشد.مشکل ولتاژمثل شرایط افت ولتاژواضافه جریان ناشی از اتصال کوتاه مدار یا وقوع خطا در سیستم بیشتر مورد توجه می باشد. برای مطالعه افت ولتاژ واضافه جریان،محققان زیادی کار کرده ...
15 صفحه اولeffect of recycled waste polymers, natural bitumen and hvs cut on the properties of vacuum bottom
the neat bitumen, an oil refining by-product, has its own inherent weakness under long-time loading at low and high temperatures. these performance limitations of neat bitumen have led researchers to modify its physical andmechanical properties. according to several studies, polymers can be used to modify the properties of bitumen. due to much lower production costs and aiming to reduce environ...
متن کاملCharacterization of Bitumen Mixed with Plastic Waste
Plastic (Polyethylene Terephthalate, PET) is now used as packaging material for a whole range of consumer products in addition to carbonated beverages. Although plastics are very useful product, but the disposal of these wastes has become a problem and is of great concern, particularly in our country. One of the solutions to the disposal of plastic wastes is recycling it...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Sustainable Architecture and Civil Engineering
سال: 2023
ISSN: ['2335-2000', '2029-9990']
DOI: https://doi.org/10.5755/j01.sace.32.1.32505