Microstructure of Nitrided AA5052 Aluminum Alloy Formed by Electron Beam Excited Plasma Technique
نویسندگان
چکیده
منابع مشابه
Microstructure and Corrosion Performance of Silica Coatings on Aluminum Surface Prepared by Plasma Electrolysis Technique
Silica phases were precipitated on aluminum surface by potentiostatic plasma electrolysis technique. Aqueous sodium silicate solutions with different concentrations were used for this purpose. SEM, EDS, XRD, surface profiles and polarization curves were used to study coatings properties. The results showed that the growth of the silica containing phases on aluminum surface was promoted by incre...
متن کاملEffect of Gas Mixture H2-N2 on Microstructure and Microhardness of Steel 32CDV13 Nitrided by Plasma
Nitriding treatments of low alloyed steels can be performed only at relatively low temperatures in order to avoid a decrease of corrosion resistance due to nitride layers formation. These conditions promote the formation of the compound layer and diffusion zone, which shows high hardness and good corrosion resistance. In the present paper, the influence of the gas mixture N2-H2 in plasma nitrid...
متن کاملTribocorrosion of Pulsed Plasma-Nitrided CoCrMo Implant Alloy
In the present study, a forged CoCrMo (ISO 5832-12) has been subjected to pulsed plasma treatment in a N2/H2 atmosphere at low temperatures (below 500 C). This treatment resulted in the formation of a layer composed by dispersed chromium nitride particles in a N-enriched metal matrix. The materials were tested for corrosion and tribocorrosion performance in 0.9 wt% NaCl at room temperature unde...
متن کاملExperimental and Numerical Investigation of Warm Deep Drawing Process of AA5052 Aluminum Alloy
Aluminum alloys have a high strength-to-weight ratio and proper anti-corrosion properties that are used in the automotive, shipbuilding and aerospace industries. The major problem with forming aluminum sheets is the low formability of aluminum sheets at room temperature. Therefore, in the present study, warm deep drawing (WDD) of AA5052-O aluminum alloy sheets with a thickness of 1mm was invest...
متن کاملTexture Evolution in Continuous Casting AA5052 Aluminum Alloy Hot Band During Equi-Biaxial Stretching
In this study, the global texture evolution in a 2 mm gauge hot band of continuous casting AA5052 aluminum alloy, annealed at 449 °C for 4 hours, was investigated. Samples were deformed to three different strain values under a near equi-biaxial stretching condition. Their textures were. The major and minor strains of these samples were measured using an automatic strain analysis system. The tex...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2005
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.46.687