Microstructure Evolution of a 10Cr Heat-Resistant Steel during High Temperature Creep
نویسندگان
چکیده
منابع مشابه
Effect of aging temperature on structural evolution of HP-Nb heat resistant steel
In this study, the changes in microstructure of HP-Nb cast heat resistant steel after 8 years of service at high temperatures were investigated. Study of microstructure using optical microscopy (OM) and scanning electron microscopy (SEM) equipped with an energy dispersive spectrometry (EDS) showed that the microstructure of this steel in as-cast condition includes an austenitic matrix, and that...
متن کاملMicrostructure evolution accompanying high temperature; uniaxial tensile creep of self-reinforced silicon nitride ceramics
Extensive transmission electron microscopy (TEM) has been performed to study the microstructure evolution of a self-reinforced silicon nitride associated with high temperature creep. A large population of strain whorls is observed in samples crept at relatively high temperatures and the strain whorls are not necessarily asymmetrical with respect to the grain boundary normal. Large angle converg...
متن کاملMicrostructure Evolution during Tensile Deformation of a Nanostructured Bainitic Steel
In situ neutron diffraction experiment was used during tensile testing at room temperature to examine the changes on the percentage and texture of both ferrite and austenite in a nanocrystalline bainitic steels transformed at two different temperatures 200°C and 300oC for different times to achieve the same phase percentages. Both samples showed an inadequate capability of austenite to transfor...
متن کاملeffect of aging temperature on structural evolution of hp-nb heat resistant steel
in this study, the changes in microstructure of hp-nb cast heat resistant steel after 8 years of service at high temperatures were investigated. study of microstructure using optical microscopy (om) and scanning electron microscopy (sem) equipped with an energy dispersive spectrometry (eds) showed that the microstructure of this steel in as-cast condition includes an austenitic matrix, and that...
متن کاملLecture 14 : Creep – Resistant Steel , Case Study
Introduction Typical operating parameters for steels used in the manufacture of power plant are compared against corresponding values for nickel alloys in aeroengines, in Table 1. In both cases, the service conditions are severe. But this is especially so for steels where the service life is many decades. The degree of reliability demanded of heat resistant steels is therefore extraordinary, an...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Science & Technology
سال: 2011
ISSN: 1005-0302
DOI: 10.1016/s1005-0302(11)60072-8