Microstructure development of pearlitic railway steels subjected to fast heating
نویسندگان
چکیده
The influence of soaking and cooling rates on the final microstructure a R260Mn pearlitic railway steel subjected to fast heating is investigated. Fast-heating experiments followed or not by at different were performed using quenching dilatometry specimens obtained from rail head. Additional cyclic done investigate evolution during thermal cycling, which relevant for applications. characterized via microhardness measurements, optical microscopy scanning electron microscopy. microstructural features are distinguished each condition detailed. study allows construction transformation diagrams after heating. Furthermore, comparison between microstructures in controlled laboratory conditions field White Etching Layers presented. results can serve as guideline future reproduction interpretation conditions.
منابع مشابه
Microstructure-based 3d Fe Modeling for Micro Cutting Ferritic- Pearlitic Carbon Steels
The mechanics of the cutting process on the microscopic level differ fundamentally from the conventional macro cutting. For example, the tool edge radius influences the cutting mechanism in micro machining significantly with regard to the effective rake angle, the minimum chip thickness, the dominance of ploughing, and the related elasto-plastic deformation of the workpiece material. These phen...
متن کاملElectropulse - induced cementite nanoparticle formation in deformed pearlitic steels
Passing one electric-current pulse through deformed pearlitic steel wires at room temperature causes the formation of cementite particles around 30 nm in size. This is found not only in some particular locations but throughout the cementite area, which reveals a different mechanism from traditional spheroidization of cementite plates because the latter leads to the formation of particles with m...
متن کاملModelling the Microstructure of Martensitic Steels
A method based on the kinetics of crystal growth has been developed and applied to the computation of three-dimensional microstrucuture in austenite-matensite steels. The detailed crystallography of the transformation is used to model a realistic martensitic microstrucuture during the transformation without an external system of stresses. The interaction energy based on the plastic work model i...
متن کاملMicrostructure and cleavage in lath martensitic steels
In this paper we discuss the microstructure of lath martensitic steels and the mechanisms by which it controls cleavage fracture. The specific experimental example is a 9Ni (9 wt% Ni) steel annealed to have a large prior austenite grain size, then examined and tested in the as-quenched condition to produce a relatively coarse lath martensite. The microstructure is shown to approximate the recen...
متن کاملEvolution of a turbulent jet subjected to volumetric heating
The goal of this study is to understand the effect of latent heat release on entrainment in cumulus clouds by employing a laboratory analogue consisting of a volumetrically heated turbulent axisymmetric jet. The jet fluid is volumetrically heated in an offsource manner to simulate condensation heat release in clouds. The experimental setup is similar to Bhat & Narasimha (1996), and the current ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials & Design
سال: 2022
ISSN: ['1873-4197', '0264-1275']
DOI: https://doi.org/10.1016/j.matdes.2022.110989