Microstructure and phase stability of suspension high velocity oxy-fuel sprayed yttria stabilised zirconia coatings from aqueous and ethanol based suspensions
نویسندگان
چکیده
منابع مشابه
Microstructure formation in plasma-sprayed functionally graded NiCoCrAlY/yttria-stabilized zirconia coatings
Functionally graded NiCoCrAlY/yttria-stabilized zirconia coatings were fabricated by plasma spraying using mechanically alloyed, plasma-spheroidized NiCoCrAlY/yttria-stabilized zirconia (YSZ) composite powders. Scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDS) analysis revealed that oxidation of aluminum, chromium and yttrium in the NiCoCrAlY alloy occurred in th...
متن کاملCharacterization of hydroxyapatiteynano-zirconia composite coatings deposited by high velocity oxy-fuel (HVOF) spray process
Hydroxyapatite (HA)ynano-zirconia composite coatings were successfully produced through high velocity oxy-fuel (HVOF) spraying of radio frequency (RF) plasma synthesized powders. Microstructure characterization and morphology analysis on the nano-structured coatings were conducted using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffractometry (XRD), and d...
متن کاملWEAR REESISTANCE OF NANOSTRUCTURED AND CONVENTIONAL YTTRIA-STABILIZED ZIRCONIA COATINGS
Partially stabilized zirconia (PSZ) has been proven to be an excellent candidate as a thermal barrier coating (TBe) for hot sections in, for instance, heat or internal combustion engines and gas turbine parts. The main functions of these coatings are reducing heat losses, reducing fuel consumption, increasing efficiency, and extending durability and life. One of the main problems involved is we...
متن کاملProcessing and Characterisation of High-velocity Suspension Flame Sprayed (hvsfs) Bioactive Glass Coatings
The High-Velocity Suspension Flame Spraying (HVSFS) technique was employed in order to deposit bioactive glass coatings onto titanium substrates. Two different glass compositions were examined: the classical 45S5 Bioglass and a newly-developed SiO2–CaO–K2O–P2O5 glass, labelled as “Bio-K”. Suitable raw materials were melted in a furnace and fritted by casting into water. The frit was dry-milled ...
متن کاملThe Study of High Temperature Oxidation behavior of Different Microstructures of HVOF Thermally Sprayed Coatings
Improvement of thermally sprayed coating properties by microstructure modification has been considered as a significant solution. Therefore, in this research the effect of dissolved oxygen content and post heat treatment on the formation and distribution of secondary phase particles, particularly in nano-scale in the coatings during spraying and after that were studied. Ni-5 wt% Al powders were...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the European Ceramic Society
سال: 2018
ISSN: 0955-2219
DOI: 10.1016/j.jeurceramsoc.2017.10.026