Microstructure and mechanical properties of thermal sprayed nanostructured Cr3C2-Ni20Cr coatings
نویسندگان
چکیده
منابع مشابه
Microstructure and Properties of Plasma Sprayed Nanostructural ZrO2 Coatings
Plasma sprayed zirconia deposits have been employed in wide applications for thermal protection. Recently, the use of nanostructural surface represents an alternative for improving the performance of these coatings. The present paper reviewed the works in this field at our research group, including synthesis of nanostructural ZrO2 powders, influence of spraying parameters on microstructure and ...
متن کاملMicrostructure and Microwave Absorption Properties of Flame Sprayed Ceramic Coatings
In this research work, airplane grade aluminum alloy substrate was coated by Al2O3/ TiO2 ceramic coatings in two different compositions as 50:50 and 87:13 using Flame spraying technique. The surface & cross-sectional morphological characterizations of the Al2O3/ TiO2 powders and coatings were performed by scanning electron microscopy (SEM). The microwave absorbing properties of coatings were ex...
متن کاملEffect of Carbide Particle Size on the Microstructure, Mechanical properties, and Wear Behavior of HVOF-sprayed WC-17% Co Coatings
This study investigates the effect of carbide particle size on the microstructure, mechanical properties, and abrasive wear resistance of WC-17%Co HVOF-sprayed coatings. The characteristics of WC-1, WC-2, and WC-3 coatings with carbide sizes of 1 µm, 0.9 µm, and 0.5 µm, respectively, were also investigated. WC-1 coating experienced the maximum carbon loss of 42%, while WC-2 and WC-3 coatings un...
متن کاملdetermination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولEvaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite
Mechanical alloying and vacuum sintering have been used to produce bulk nanostructured Ti5Si3 and Ti5Si3-15Wt.% Al2O3 nanocomposite. X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) were used to study the microstructural characteristics of the samples. Indentation method was used to calculate hardness, elastic modulus and fracture toughness ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research
سال: 2008
ISSN: 1516-1439
DOI: 10.1590/s1516-14392008000200005