Microstructural Characterization and Mechanical Properties of PA11 Nanocomposite Fibers
نویسندگان
چکیده
منابع مشابه
determination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولPreparation and Characterization (Mechanical and Water Absorption Properties) of CMC/PVA/Clay Nanocomposite Films
The aim of this study was to produce Carboxy Methyl Cellulose (CMC) and Poly Vinyl Alcohol (PVA) films and to enhance their properties by reinforcing them with nanoclay particles. Thus, nanocomposite films were prepared with blending of CMC and PVA, as a matrix and several filler loadings of nanoclay particles. The various formulations of nanocomposite films obtained with casting m...
متن کاملMechanical and Microstructural Properties of Biological Materials
Biological materials, such as isolated protein networks, tissues and living cells are extremely heterogeneous and contain structures on length scales from nanometers to hundreds of microns. Their complex geometries and sensitivity to environmental conditions make traditional measurements of structure and mechanics difficult, challenging experimenters to develop new techniques. In this work, we ...
متن کاملManufacture and Mechanical Properties of Nanocomposite Laminates
This work mainly aims to manufacture nanocomposite laminates at first. The prepreg AS-4 graphite/PolyEtherEtherKetone laminates were used to make a 16-layered APC-2 laminate of 2 mm thick via curing the modified diaphragm. The nanoparticles of Silica (SiO2) were uniformly spread on the specific interfaces totally about 1-3% by weight of a laminate by sol-gel method. Second, by the results of me...
متن کاملMorphology Development and Mechanical Properties Variation during Cold-Drawing of Polyethylene-Clay Nanocomposite Fibers
In this work, the influence of composition and cold-drawing on nanoand micro-scale morphology and tensile mechanical properties of PE/organoclay nanocomposite fibers was investigated. Nanocomposites were prepared by melt compounding in a twin-screw extruder, using a maleic anhydride grafted linear low density polyethylene (LLDPE–g–MA) and an organomodified montmorillonite (Dellite 67G) at three...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Engineering and Performance
سال: 2015
ISSN: 1059-9495,1544-1024
DOI: 10.1007/s11665-015-1817-2