Micro fibrillated cellulose reinforced bio-based rigid high-density polyurethane foams
نویسندگان
چکیده
منابع مشابه
Applications of Cellulose Nanowhiskers and Lignin In Preparation Of Rigid Polyurethane Nanocomposite Foams
Lignin is the second most abundant biopolymer on Earth, right after cellulose, with a highly complex chemical structure that hinders its possible utilizations. As a consequence, it is mostly burned as an inexpensive resource, generating green electricity or heat that in turn can be used for the deconstruction of biomass itself. Applications that utilize lignin in different manners are of great ...
متن کاملEffects of silicon surfactant in rigid polyurethane foams
The rigid polyurethane foams (RPUFs) have been fabricated from high functional crude 4,4’-di-phenylmethane diisocyanate (CMDI) and polypropylene glycols (PPGs) for a wide range of surfactant concentration with an environmently friendly blowing agent (HFC 365mfc). Cream time, gel time, and tack-free time increased with the addition of surfactant. Foam density decreased rapidly to a minimum at 0....
متن کاملCellulose-reinforced Composites: From Micro-to Nanoscale
This paper present the most relevant advances in the fields of: i) cellulose fibres surface modification; ii) cellulose fibres-based composite materials; and iii) nanocomposites based on cellulose whiskers or starch plateletlike nanoparticles. The real breakthroughs achieved in the first topic concern the use of solvent-free grafting process (plasma) and the grafting of the matrix at the surfac...
متن کاملBio-Based Rigid Polyurethane Foam from Liquefied Products of Wood in the Presence of Polyhydric Alcohols
Rigid polyurethane foams were prepared from the liquefied wood polyols, which was obtained by the liquefaction of southern pine wood in the presence of polyhydric alcohols with sulfuric acid catalyst by using microwave-assistant as an energy source. The properties of liquefied biomass-based polyols and the rigid polyurethane foams were investigated. The results indicated that the foams exhibite...
متن کاملAging of Rigid Polyurethane Foams: Thermal Conductivity of N2 and Cyclopentane Gas Mixtures
The thermal conductivity of three mixtures of nitrogen and cyclopentane is measured using a transient hot wire method, at temperatures between 315.14 and 395.89K, and pressures up to 0.53MPa. These mixtures are important in the evaluation of the evolution of the thermal insulation capacity of closed-cell polyurethane foams considering their aging during the respective applications’ total life t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Cellulose
سال: 2021
ISSN: 0969-0239,1572-882X
DOI: 10.1007/s10570-021-03801-1