Mechanochemical Synthesis of Niobium Pentoxide Nanoparticles
نویسندگان
چکیده
منابع مشابه
Mechanochemical synthesis of alumina nanoparticles
Abstract: Nano- size alumina particles have been synthesized by mechanical activation of a dry powder mixture of AlCl3 and CaO. Mechanical milling of the above raw materials with the conditions adopted in this study resulted in the formation of a mixture consisting of crystalline CaO and amorphous aluminum chlorides phases. There was no sign of chemical reaction occurring during milling stag...
متن کاملMechanochemical Synthesis and Characterisation of Bismuth-Niobium Oxide Ion Conductors
Bismuth niobate solid solutions, BixNbOδ (2.5 ≤ x ≤ 6), have been prepared using a mechanochemical method. The solid solutions were also prepared using a solidstate conventional method for comparison purposes. Bi3NbO7 was successfully obtained via a mechanochemical method at a lower synthesis temperature (milled at 1000 rpm for one hour followed by heating at 700C for 24 h) than the conventiona...
متن کاملSize-controlled photochemical synthesis of niobium nanoparticles.
The size of photochemically-prepared niobium nanoparticles (NbNP) can be controlled by varying the concentration of the photoinitiator in the reaction mixture. The particles, which may be metallic in nature, are readily oxidized upon air exposure to form stable niobium(v) oxide nanoparticles (NbONP) that act as strong Brønsted acids.
متن کاملSynthesis and electrochemical properties of niobium pentoxide deposited on layered carbide-derived carbon
Nb2O5 nanoparticles were hydrothermally deposited on carbidederived carbon (CDC). Addition of phenylphosphonic acid affects the particle size and
متن کاملRoles of niobium pentoxide, vanadium pentoxide and titanium dioxide in the grain growth and sintering of uranium dioxide
Pure uo2 sinters readily at temperatures below 1600°c when non-stoichiometric oxygen introduced during the presintering treatment is available for diffusion and subsequent densification. In the absence of excess oxygen sintering occurs at temperatures above 1600°C by self-diffusion of stoichiometric oxygen in uo2 • Grain growth occurs when open porosity has been eliminated and is controlled by ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2001
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.42.1623