Mechanical properties of concrete reinforced with graded pva fibers
نویسندگان
چکیده
Concrete is poor in tensile property due to its brittle nature. Improvement the mechanical properties of concrete carried by combining rebars and fibers concrete. Earlier research state that non-metallic fibres improve pre-crack performance metallic post crack performance. Short resist micro-cracks at an early stage long macro-cracks. The combination short makes much effective. In this study, investigation done on PVA fiber with lengths 6mm (Short fiber) 12mm (Long hybridization 50MPa two stages; first stage, optimum dosage content strength effectiveness strengths carried. Further, second 30% SF + 70% LF, 50%SF 50% LF for finding hybrid combination. Mechanical like flexural strength, split compressive investigated. results obtained are compared mono control mix. parameters observed hybridization. According functionality, showed desired improving overall More improves growth resistance than
منابع مشابه
Mechanical Behavior of Hybrid Fiber Reinforced High Strength Concrete with Graded Fibers
Brittleness, which was the inherent weakness in High Strength Concrete (HSC), can be avoided by reinforcing the concrete with discontinuous fibers. Reinforcing HSC with more than one fiber is advantageous in an overall improvement of the mechanical performance of the composite. In this experimental study, Hybrid Fiber Reinforced High Strength Concrete (HyFR-HSC) mixes were formed by blending si...
متن کاملMechanical Properties of Hybrid Fibre Reinforced Concrete With Steel And
The experimental study deals with Hybrid fibre reinforced concrete with the use of (Polypropylene and Recycled polyethylene terephthalate RPET). The M40 grade concrete used was designed by using IS10262-2009 code. The steel fibre and synthetic fibre were added at the volume fractions up to 0.5%. Test results showed that the fibres, when used in a hybrid form, could result in superior composite ...
متن کاملStrength and Toughness of Reinforced Concrete with Coated Steel Fibers
The effect of zinc phosphate (ZP) and zinc calcium phosphate (ZCP) coatings on the reinforcing mechanisms of smooth steel fiber in cementitious matrix have been studied. The results of pull out tests illustrated that by coating smooth steel fiber the pull-out load may be increased up to 100%. The effect of zinc phosphate coating on interface bonding was more than zinc-calcium phosphate coating....
متن کاملFracture Behavior and Properties of Functionally Graded Fiber-Reinforced Concrete
In concrete pavements, a single concrete mixture design is selected to resist mechanical loading without attempting to adversely affect the concrete pavement shrinkage, ride quality, or noise attenuation. An alternative approach is to design distinct layers within the concrete pavement surface which have specific functions thus achieving higher performance at a lower cost. The objective of this...
متن کاملInvestigation of Mechanical Properties of Lithium-Based Geopolymer Composites Reinforced with Basalt Fibers
Recently, geopolymer binders have been considered because of low cost, simple processes for synthesis and many raw materials in nature. Geopolymer with brittle nature does not have high strength and cannot be used alone for structural materials. Therefore, to use in different structures, the composite which is reinforced with fibers such as carbon, glass, basalt, etchasbeen used. In this resear...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: E3S web of conferences
سال: 2021
ISSN: ['2555-0403', '2267-1242']
DOI: https://doi.org/10.1051/e3sconf/202130901177