Mechanical Properties of Cemented Carbides Prepared by Hot Isostatic Pressing
نویسندگان
چکیده
منابع مشابه
Biomimetic evaluation of β tricalcium phosphate prepared by hot isostatic pressing
Two types of completely densified β-TCP tablets were synthesized from a stoichiometric β-TCP powder. The first ones (TCP) were conventionally sintered, while the second ones (TCP-T) were sintered and treated by hot isostatic process (HIP). The HIP produced completely densified materials with relative densities greater than 99.9% and a transparent appearance of tablets. Samples were immersed in ...
متن کاملNeural Observer for the Hot Isostatic Pressing
Hot Isostatic Pressing (HIP'ing) is one of several processes used for consolidating porous materials (such as metal powders) to high density. The equations describing the HIP'ing system dynamics are immensely complicated and highly nonlinear, thus complicating any controller design for the system. Further complications arise due to the fact that one of the system's states, grain size, cannot be...
متن کاملEffects of Multi-Phase Reinforcements on Microstructures, Mechanical and Tribological Properties of Cu/Ti3SiC2/C/BN/GNPs Nanocomposites Sintered by Vacuum Hot-Pressing and Hot Isostatic Pressing
Cu/Ti3SiC2/C/BN/GNPs nanocomposites were prepared by vacuum hot-pressing (HP) sintering and hot isostatic pressing (HIP) sintering methods. Microstructures, mechanical and tribological properties of Cu/Ti3SiC2/C/BN/GNPs nanocomposites were investigated. Microstructures were examined by optical microscopy (OM), X-ray diffraction (XRD) and scanning electron microscope (SEM). Mechanical properties...
متن کاملEFFECTS OF HOT ISOSTATIC PRESSING ON THE TENSILE PROPERTIES OF A356 CAST ALLOY
The influences of age hardening and HIP (Hot Isostatic Pressing) on the mechanical properties of A356 (Al 7Si 0.6 Mg) casting alloys were studied. Cast bars were homogenized, heated and maintained at a temperature of 540°C for a duration of 2 hours, followed by rapid cooling in a polymeric solution. The castings were age hardened at 180°C for a duration of 4 hours before being subjected to HIP ...
متن کاملThermoelectric Properties of Alumina-Doped Bi0.4Sb1.6Te3 Nanocomposites Prepared through Mechanical Alloying and Vacuum Hot Pressing
In this study, γ-Al2O3 particles were dispersed in p-type Bi0.4Sb1.6Te3 through mechanical alloying to form γ-Al2O3/Bi0.4Sb1.6Te3 composite powders. The composite powders were consolidated using vacuum hot pressing to produce nanoand microstructured composites. Thermoelectric (TE) measurements indicated that adding an optimal amount of γ-Al2O3 nanoparticles improves the TE performance of the fa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 1978
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.25.283