Mechanical polishing as an improved surface treatment for platinum screen-printed electrodes
نویسندگان
چکیده
منابع مشابه
Can the mechanical activation (polishing) of screen-printed electrodes enhance their electroanalytical response?
The mechanical activation (polishing) of screen-printed electrodes (SPEs) is explored and shown to exhibit an improved voltammetric response (in specific cases) when polished with either commonly available alumina slurry or diamond spray. Proof-of-concept is demonstrated for the electrochemical sensing of nitrite where an increase in the voltammetric current is found using both polishing protoc...
متن کاملEffect of pre-treatment on the surface and electrochemical properties of screen-printed carbon paste electrodes.
The effect of various electrochemical pre-treatment methods on the surface and electrochemical properties of screen-printed carbon paste electrodes (SPCE) prepared with three different commercial products was examined. It was observed that a positively charged redox couple, e.g., hexaammineruthenium(III), exhibited quasi-reversible behavior at the untreated SPCE. However, the cyclic voltammogra...
متن کاملScreen Printed Electrodes Used for Detection of Ionic Heavy Metals
Electrochemical sensors and biosensors based on inhibition are sensitive methods to determine the concentration of toxic substances in environment and clinic applications. Heavy metal cations bind to biological molecules and inactive important enzyme systems, such as acetylcholinesterase (AChE). In this paper, the amperometric sensors and biosensors based on AChE inhibition were developed using...
متن کاملNovel CeO₂-based screen-printed potentiometric electrodes for pH monitoring.
Nuclear waste repositories are being installed in deep excavated rock formations in some places in Europe to isolate and store radioactive waste. In France, the Callovo-Oxfordian formation (COx) is a possible candidate for nuclear waste storage. This work investigates the applicability of CeO(2)-based oxides (CeO(2), Ce(0.8)Sm(0.2)O(2) and Ce(0.8)Zr(0.2)O(2)) for monitoring the pH of the COx po...
متن کاملScreen Printed Electrodes for Biosensor Application: Reproducibility, Sensitivity and Stability
Screen printed electrodes (SPEs) have been prepared in the Biosensor Lab @ ENEA, according to different layouts and configurations, i.e. front-back or concentric geometry. Different pastes and composition have been tested depending on the application and requirements for flow or batch measurements. In order to optimize the quality of the electrochemical response, graphite pastes and metal doped...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensing and Bio-Sensing Research
سال: 2016
ISSN: 2214-1804
DOI: 10.1016/j.sbsr.2016.05.006