Mechanical Limitations in High Average Power Linacs
نویسندگان
چکیده
منابع مشابه
emittance control in high power linacs
چکیده این پایان نامه به بررسی اثر سیم پیچ مغناطیسی و کاوه یِ خوشه گر با بسامد رادیویی بر هاله و بیرونگراییِ باریکه هایِ پیوسته و خوشه ایِ ذرات باردار در شتابدهنده های خطیِ یونی، پروتونی با جریان بالا می پردازد و راه حل هایی برای بهینه نگهداشتن این کمیتها ارایه می دهد. بیرونگرایی یکی از کمیتهای اساسی باریکه هایِ ذرات باردار در شتابدهنده ها است که تاثیر قابل توجهی بر قیمت، هزینه و کاراییِ هر شتابدهند...
High Average Current Effects in Energy Recovery Linacs*
Energy Recovery Linacs (ERLs) can be used as high efficiency driver accelerators to Free Electron Lasers, synchrotron radiation light sources and colliders. Energy recovery has been successfully demonstrated up to 5 mA of average current in the Jefferson Lab 1.7 kW IR FEL. Future designs call for much higher average currents of order 100 mA. A number of phenomena can potentially limit the perfo...
متن کاملHigh Power Proton Linacs, Applications and Design Concepts
Proton linacs with very high beam power constitute the first part in the production chain for different applications. Proton beams of several tens of MW can be used to yield an extremely high flux of neutrons and other secondary particles. Hence, possible applications range from accelerator driven transmutation of nuclear waste and spallation neutron sources to irradiation installations for mat...
متن کاملFaraday Isolators for High Average Power Lasers
The average power of solid-state and fiber lasers has considerably increased during the last ten years. The 10 kW power is not record-breaking any longer, and a topical problem nowadays is to create lasers with a power of 100 kW. Therefore, the study of thermal effects caused by absorption of laser radiation in the bulk of optical elements becomes ever more important. The Faraday isolator (FI) ...
متن کاملAdvanced Rf Power Sources for Linacs*
In order to maintain a reasonable over-all length at high center-of-mass energy, the main linac of an electronpositron linear collider must operate at a high accelerating gradient. For copper (non-superconducting) accelerator structures, this implies a high peak power per unit length and a high peak power per RF source, assuming a limited number of discrete sources are used. To provide this pow...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Nuclear Science
سال: 1985
ISSN: 0018-9499
DOI: 10.1109/tns.1985.4334296