Mechanical cycling effects at Fe–Mn–Si–Cr–Ni SMAs obtained by powder metallurgy
نویسندگان
چکیده
منابع مشابه
Nanostructured bainitic steel obtained by powder metallurgy approach: structure, transformation kinetics and mechanical properties
A PM approach is investigated in the context of extremely fine low temperature bainitic steels with a reasonable combination of ultimate tensile strength and uniform elongation. The strategy consists of three steps. First, ball milling is used for mechanical alloying and to create a large density of interfaces prior to sintering. In the second step, spark plasma sintering is used as a rapid con...
متن کاملAZ31/HA-Zeolite Nano Crystalline Biocomposite Fabricated by Mechanical Alloying and Powder Metallurgy: Mechanical Properties
Magnesium and its alloys are light, biodegradable, biocompatible metals that have promising applications as biomaterials. Magnesium is potentially useful for orthopedic and cardiovascular applications. However, the corrosion rate of this metal is so high that its degradation occurs before the end of the healing process. One of the ways to improve the corrosion rate is to compose it’s with cer...
متن کاملPorous, Superelastic NiTi Produced by Powder-Metallurgy
Near-stoichiometric NiTi was foamed in the solid state at elevated temperatures through creep expansion of highpressure argon pores previously entrapped during powder consolidation. A sample with 17% porosity was found to be superelastic up to a compressive stress of 800 MPa.
متن کاملEffects of Friction Stir Process Parameters on Microstructure and Mechanical properties of Aluminum Powder Metallurgy Parts
The effects of friction stir processing (FSP) on the microstructure and mechanical properties of aluminum powder metallurgy (PM) parts was investigated. PM parts were then subjected to FSP at advancing speeds (v) of 40-200 mm/min and tool rotational speeds (ω) of 800-1600 rpm. Microhardness (HV) and tensile tests at room temperature were used to evaluate the mechanical properties of the frictio...
متن کاملaz31/ha-zeolite nano crystalline biocomposite fabricated by mechanical alloying and powder metallurgy: mechanical properties
magnesium and its alloys are light, biodegradable, biocompatible metals that have promising applications as biomaterials. magnesium is potentially useful for orthopedic and cardiovascular applications. however, the corrosion rate of this metal is so high that its degradation occurs before the end of the healing process. one of the ways to improve the corrosion rate is to compose it’s with ceram...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Physics Procedia
سال: 2010
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2010.11.087