Mechanical Characterization of Steel Fibre Reinforced Acrylic Emulsion Polymer Modified Concrete
نویسندگان
چکیده
منابع مشابه
Mechanical Properties of Hybrid Fibre Reinforced Concrete With Steel And
The experimental study deals with Hybrid fibre reinforced concrete with the use of (Polypropylene and Recycled polyethylene terephthalate RPET). The M40 grade concrete used was designed by using IS10262-2009 code. The steel fibre and synthetic fibre were added at the volume fractions up to 0.5%. Test results showed that the fibres, when used in a hybrid form, could result in superior composite ...
متن کاملCharacterization of reinforced concrete beams strengthened by steel reinforced polymer and grout ( SRP and SRG ) composites
13 The use of externally bonded steel reinforced polymer (SRP) and steel reinforced grout (SRG) is a promising new technology for increasing fl a d b a 14 15 16 17 18 19 © 20
متن کاملPunching shear strength of steel fibre reinforced concrete slabs
The ultimate strength of reinforced concrete slabs is frequently governed by the punching shear capacity, which may be increased with addition of traditional fitments such as reinforcing steel, headed studs or shear heads. In addition to these traditional methods of strengthening against punching, steel fibre reinforcement has proved to be an effective and viable alternative. The addition of fi...
متن کاملStrength and Permeability Characteristics of Steel Fibre Reinforced Concrete
The results reported in this paper are the part of an extensive laboratory investigation undertaken to study the effects of fibre parameters on the permeability and strength characteristics of steel fibre reinforced concrete (SFRC). The effect of varying fibre content and curing age on the water permeability, compressive and split tensile strengths of SFRC was investigated using straight steel ...
متن کاملStrength Development and Water Permeability of Steel Fibre Reinforced Concrete
Research reported in this paper was carried to study the water permeability of steel fibre reinforced concrete (SFRC) with varied aspect ratios of steel fibres. Corrugated steel fibres were used in the investigation at constant fibre content of 0.5%. Relationship of water permeability with compressive strength and split tensile strengths has been presented. The water permeability was observed t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Engineering and Applied Sciences
سال: 2011
ISSN: 1816-949X
DOI: 10.3923/jeasci.2011.185.190