Measurement of Bunker Oil / DME Blended Fuel Viscosity for Diesel Engine Application
نویسندگان
چکیده
منابع مشابه
The Potential of Dme-diesel Blends as an Alternative Fuel for Ci Engines
This paper provides a comprehensive review of the technical feasibility of DME-Diesel blend as an alternative fuel for compression-ignition engines for automotive applications. DME is a synthetic fuel produced by the conversion of various feedstocks such as natural gas, coal, oil residues and bio-mass. The compatible properties such as high cetane number and low auto-ignition temperature with s...
متن کاملANN and MLR Model of Specific Fuel Consumption for Pyrolysis Oil Blended with Diesel used in a Single Cylinder Diesel Engine: A Comparative Study
The main objective of the research is to compare the accurateness of Artificial Neural Networks (ANN) and Multiple Linear Regressions (MLR) model for Specific Fuel Consumption for pyrolysis oil blended with diesel used in a single cylinder diesel engine. In this study, parameters i. e. Injection Timing, Injection Pressure, Compression Ratio, and Load are taken. Artificial Neural Networks (ANN) ...
متن کاملCharacteristics of fish oil biodiesel with the impact of diesel fuel addition on a CI engine
The present study focuses on the optimization in the use of non-petroleum fuel derived from waste fish oil fuels, as a replacement for petroleum diesel fuel for compression ignition engine. The study comprises of comparison between results of fish oil biodiesel-diesel blends on a compression ignition engine. Fuel properties such as viscosity, density, heat value of fuel, cetane number and a fla...
متن کاملInvestigating the Effect of Engine Lubricant Viscosity on Engine Friction and Fuel Economy of a Diesel Engine
4 Overview of the Thesis 11
متن کاملThe influence of operating parameters on the performance and emissions of a DI diesel engine using methanol-blended-diesel fuel
In this study, the effects of injection pressure and timing on the performance and emission characteristics of a DI diesel engine using methanol (5%, 10% and 15%) blended-diesel fuel were investigated. The tests were conducted on three different injection pressures (180, 200 and 220 bar) and timings (15 , 20 , and 25 CA BTDC) at 20 Nm engine load and 2200 rpm. The results indicated that brake s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Marine Engineering
سال: 2012
ISSN: 1346-1427,1884-3778
DOI: 10.5988/jime.47.729