Material combination conditions of the polymer infiltration and pyrolysis-melt infiltration hybrid process to make a dense and uniform matrix of SiC fiber-reinforced SiC matrix composite
نویسندگان
چکیده
منابع مشابه
EFFECT OF NANO SiC ADDITIVE ON MCMB-SiC COMPOSITE FABRICATION VIA MOLTEN SILICON INFILTRATION
C-SiC composites with carbon-based mesocarbon microbeads (MCMB) preforms are new type of highpreformance and high-temperature structural materials for aerospace applications. In this study MCMB-SiC composites with high density (2.41 g.cm-3) and high bending strength (210 MPa,) was prepared by cold isostatic press of mixed mesophase carbon powder derived from mesophase pitch with different amoun...
متن کاملCasting of SiC Reinforced Metal Matrix Composites
Composites based on two aluminium alloys (A536 and 6061) reinforced with 10% or 20% volume fraction of SiC particles were produced by gravity casting and a novel two-step mixing method was applied successfully to improve the wettability and distribution of the particles. The SiC particles were observed to be located predominantly in the interdendrit ic regions, and a thermal lag model is propos...
متن کاملApplication of Electrophoretic Deposition for Interfacial Control of High-Performance SiC Fiber-Reinforced SiC Matrix (SiCf/SiC) Composites
This chapter reviews the novel fabrication process of continuous SiCf /SiC composites based on electrophoretic deposition (EPD). EPD process is very effective for achieving relatively homogeneous carbon coating with the thickness of several tens to hundreds nanometers on SiC fibers. Carbon interface with the thickness of at least 100 nm formed by EPD acts effectively for inducing interfacial de...
متن کاملTensile and Flexural Analysis of a Hybrid Bamboo/Jute Fiber-reinforced Composite with Polyester Matrix as a Sustainable Green Material for Wind Turbine Blades
Recently, there has been a fast growth in research and investigation in the natural fibre composite due to the advantages of these materials, such us low environmental impact, low cost and good mechanical properties compared to synthetic fibre composites. Much effort has gone into increasing the mechanical performance and applications of natural fibes. This paper examines the mechanical propert...
متن کاملKnowledge Discovery System For Fiber Reinforced Polymer Matrix Composite Laminate
In this paper Knowledge Discovery System (KDS) is proposed and implemented for the extraction of knowledge-mean stiffness of a polymer composite material in which when fibers are placed at different orientations. Cosine amplitude method is implemented for retrieving compatible polymer matrix and reinforcement fiber, which is coming under predicted fiber class, from the polymer and reinforcement...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 2021
ISSN: 1348-6535,1882-0743
DOI: 10.2109/jcersj2.21004