Manufacturing and controlling 5-axis ball screw driven industrial robot moving through G codes
نویسندگان
چکیده
These days, in industrial robot applications, servo motors with reducer have been used to move manipulators. Due the weight of parts, it causes undesirable conditions such as backward movement, downward movement and vibration caused by moments inertia at time movement. In this study, step motor ball screw driven actuators, which use push-pull force instead reducers, were utilized provide rotational arms. The system reduces effect movements joints, restricts free joints. It also provides an advantage reducing costs since uses smaller motors. articulated robots, complexity kinematic equations high-order polynomials for trajectory planning cause difficulties controlling. information points, where went during manual was obtained using macros prepared program interface without equations. position lines taken these points printed a text file adding code G01 f feed-rate. made running control. This method allows operator advanced kinematics knowledge.
منابع مشابه
Monte-Carlo Simulation Technique for Repeatability Analysis of 3-axis Cartesian Robot using Position Resolution of a Ball Screw
Offline programming will be made for simulating the end-effector motion of a 3-axis Cartesian robot to figure out whether it could be positioned within the bound of peg-in-hole working condition or not. The 3axis Cartesian robot is for handling glass lenses of both digital cameras and cellular phone cameras of which needs are gradually increasing worldwide. The endeffector of robot has a vacuum...
متن کاملDesign and implementation of a ball-driven omnidirectional spherical robot
Article history: Received 1 December 2011 Received in revised form 13 April 2013 Accepted 16 April 2013 Available online 20 May 2013 We designed and implemented a novel omnidirectional spherical robot. Instead of using wheels or flywheels, a driven ball is installed inside the spherical shell and driven by two orthogonally-mounted rollers; thus, the omnidirectional mobility of the robot with no...
متن کاملError Analysis and Compensation Method Of 6-axis Industrial Robot
Jianhao Zhang, Jinda Cai Numerical Control And Display Lab, USST, 200093 ShangHai,China Emails:[email protected] Abstract:A method of compensation is proposed based on the error model with the robot’s parameters of kinematic structure and the joint angle. Using the robot kinematics equation depending on D-H algorithm, a kinematic error model is deduced relative to the end actuator of the robot, ...
متن کاملA practical approach for simulation and manufacturing of a ball-end mill using a 5-axis CNC grinding machine
This paper presents a detailed manufacturing model that can be used for grinding a ball-end mill using 5-axis CNC (computer numerical controlled) grinding machine. The profile of the helical groove can be calculated exactly using the given wheel profile and relative movements between the workpiece and the grinding wheel. The proposed model is related to some analytical, differential geometry an...
متن کاملGraphics-assisted Rolling Ball Method for 5-axis surface machining
In this paper, a graphics hardware-assisted approach to 5-axis surface machining is presented that builds upon a tool positioning strategy named the Rolling Ball Method presented in an earlier paper by the present authors [Comput. Aided Des. 35 (2003) 347]. The depth buffer of the computer’s graphics card is used to compute the data needed for the Rolling Ball Method, which generates gouge-free...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Gümü?hane üniversitesi fen bilimleri enstitüsü dergisi
سال: 2022
ISSN: ['2146-538X']
DOI: https://doi.org/10.17714/gumusfenbil.990175