MAGNETOVIBRATED TECHNOLOGY OF MAGNETIC-HARD MATERIAL POWDER DOSAGE

TEM INVESTIGATION OF RAPIDLY SOLIDIFIED NDFEB HARD MAGNETIC MATERIAL

The surface condition and microstructure of near stoichiometric (Fe823Ndll.8B5.9) Nd-Fe-B alloy ribbons and the effect of melt spinning parameters were investigated using optical, scanning and transmission electron microscopes (SEM, TEM). The formation of gas pockets on the roll surface of the ribbons during melt spinning can prevent heat transform and result in local coarse grains. The local t...

Hard Magnetic Material for Perpendicular Magnetic Anisotropic Field in Electromagnetic Actuator Fabrication

This paper describes a high power electromagnetic microactuator fabrication method that combines the hard magnetic Fe/Pt process, Ni/Fe permalloy magnetic circuit design, bulk micromachining, and excimer laser ablation. The hard magnetic material Fe/Pt is deposited under low temperature less than 300◦C by sputter onto a suspension diaphragm to produce a perpendicular magnetic anisotropic field....

Hard Magnetic Thin Films

Hard magnetic films have a broad application area ranging from magnetic recording media to microelectromagnetic devices. A challenge for recording media is the 60% annual increase in areal density, which requires ever smaller magnetic dots. However, for a given magnetic anisotropy the reduction of dot size is limited, since below a critical magnetic volume the magnetisation becomes thermally un...

Synthesis of Hard Carbon- Silicon Nanocomposite as Anode Active Material for Lithium-Ion Batteries

In this research, using phenolic resin as the precursor of carbon and various amounts of ethylene glycol as a pore former, porous samples of hard carbon were synthesized. Samples were characterized by x-ray diffraction (XRD) and N2 adsorption-desorption methods. Broad diffraction peaks represent the amorphous structure of samples. Moreover, the gas adsorption-desorption curves showed that the a...

Effects of powder recycling on stainless steel powder and built material properties in metal powder bed fusion processes