Magnetically suspended blood pump with hybrid magnetic bearing
نویسندگان
چکیده
منابع مشابه
Optimization of a Hybrid Magnetic Bearing for a Magnetically Levitated Blood Pump via 3-D FEA.
In order to improve the performance of a magnetically levitated (maglev) axial flow blood pump, three-dimensional (3-D) finite element analysis (FEA) was used to optimize the design of a hybrid magnetic bearing (HMB). Radial, axial, and current stiffness of multiple design variations of the HMB were calculated using a 3-D FEA package and verified by experimental results. As compared with the or...
متن کاملA Compact Magnetic Bearing System for Axial Flow Blood Pump
In this paper, a compact magnetic bearing system has been developed for axial flow blood pumps. The system is composed of two radial hybrid magnetic bearings (HMBs) and a brushless permanent magnet DC motor. The impeller of the pump is enclosed in the rotor that is suspended by the two HMBs with five-degree of freedom (DOF) control, among which four radial directions are actively controlled, an...
متن کاملGas pump with a magnetically coupled piston
In recent gas-phase nonlinear optics experiments it has been necessaq to prepare gas mixtures with very homogenous composition and temperature inside the measurement cell.’ The gas cell contains a relatively massive electrode structure,’ which is in poor thermal contact with the cell walls, and which leaves no room for an effective stirring device. To effectively mix the gas in the cell we have...
متن کاملMagnetically Suspended Reaction Sphere with One-axis Hysteresis Drive
This thesis presents the design, modeling, implementation, and control of a magnetically suspended reaction sphere with one-axis hysteresis drive (1D-MSRS). The goal of this project is two fold: (a) exploring the design for a reaction sphere in 3D for spacecraft’s attitude control, and (b) studying the performance of the hysteresis motor in reaction wheel applications. The 1D-MSRS is a motor wi...
متن کاملBearing Dynamic Characteristics of the Ventrassist Rotary Blood Pump
The VentrAssist implantable rotary blood pump, intended for long term ventricular assist, is under development and is currently being tested for its rotor-dynamic stability. A shaftless impeller, which also acts as the rotor of the brushless DC motor, is passively suspended in the pump cavity by hydrodynamic forces. The paper presents experimental investigation of the displacement of the impell...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Life Support Engineering
سال: 2007
ISSN: 1341-9455,1884-5827
DOI: 10.5136/lifesupport.19.supplement_29