Machining and Surface Characteristics of AISI 304L After Electric Discharge Machining for Copper and Graphite Electrodes in Different Dielectric Liquids
نویسندگان
چکیده
منابع مشابه
investigation of gassing behavior, electric and dielectric properties of different insulating fluids.
ترانسفورماتورهای قدرت از اجزای اصلی شبکه تامین انرژی الکتریکی می باشند که عملکرد قابل اطمینان ترانسفورماتورها یکی از فاکتورهای مهم و تعیین کننده در تامین انرژی الکتریکی محسوب می شود. در نتیجه بررسی و مانیتور عملکرد ترانسفورماتورها در شبکه و همچنین عیب یابی این ترانسفورماتورها غیرقابل اجتناب و ضروری می باشد. به طور کلی عایق های مایع در صنعت فشار قوی کاربردهای متفاوتی دارند که مهمترین وظیفه آنها...
15 صفحه اولFatigue Life of Graphite Powder Mixing Electrical Discharge Machining AISI D2 Tool Steel
The present paper deals with the design of experimental work matrices for two groups of experiments by using Response surface methodology (RSM). The first EDM group was dealt with the use of kerosene dielectric alone, while the second was treated by adding the graphite micro powders mixing to dielectric fluid (PMEDM). The total heat flux generated and fatigue lives after EDM and PMEDM models we...
متن کاملExperimental and Investigation of Micro Electric Discharge Machining Process of Aisi 1040
There is an increasing demand for industrial products, not only with the increased number of functions and also there will be a requirement of product in reduced size. Hence, it is essential to develop a product with maximum functions and minimum size. Micromachining technology gives the best solution to develop the product with maximum number of functions and also the size of the product will ...
متن کاملExperimental Investigation of Surface Roughness and Kerf Width During Machining of Blanking Die Material on Wire Electric Discharge Machine
Wire electric discharge machine (WEDM) is spark erosion in unconventional machining technique to cut hard and the conductive material with a wire as an electrode. The blanking die material SKD 11 is a high carbon and high chromium tool steel with high hardness and high wearing resistance property. This tool steel has broad application in press tools and dies making industries. In this research ...
متن کاملElectro - discharge machining of mesoscopic parts with electroplated copper and hot - pressed silver tungsten electrodes ∗
Recent advances in the development of plasma etchers for silicon has brought machines to the market which are able to etch silicon with high etch rates (>5 μm min−1) at high anisotropy (taper of sidewalls <1.5◦). Micromachined silicon is therefore not only suitable for applications in micromechanics but it can also fill the gap which exists between conventional macromachining (milling, turning)...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Engineering, Technology & Applied Science Research
سال: 2017
ISSN: 1792-8036,2241-4487
DOI: 10.48084/etasr.1250