Low Temperature Soda-Oxygen Pulping of Bagasse
نویسندگان
چکیده
منابع مشابه
Low Temperature Soda-Oxygen Pulping of Bagasse.
Wood shortages, environmental pollution and high energy consumption remain major obstacles hindering the development of today's pulp and paper industry. Energy-saving and environmental friendly pulping processes are still needed, especially for non-woody materials. In this study, soda-oxygen pulping of bagasse was investigated and a successful soda-oxygen pulping process for bagasse at 100 °C w...
متن کاملinvestigation on soda and soda- aq pulping of whole kenaf
the present research has been conducted to investigate the soda and soda-anthraquiuone pulping from whole kenaf (v36). in this respect, anatomical characteristics of kenaf bast and core fibers as well as the soda and soda-aq pulp properties produced at four sodium hydroxide concentrations, namely 25, 30, 35 and 40 (g/lit), have been evaluated. the pulping results indicated that pulp yield and k...
متن کاملinvestigation on soda oxygen delignification reaction kinetics of old corrugated container (occ) pulping
the kinetics of old corrugated container (occ) soda-oxygen delignification was investigated. three delignification temperatures (145,165 and 175ºc) were applied. the pulping duration was adjusted at 150 minutes and the measurements were conducted at 10 minutes intervals. the pulping consistency, oxygen pressure and active alkali were constant at 10%, 6 bar and 18% naoh respectively in all pulpi...
متن کاملEthylene Glycol/soda Organosolv Pulping of Olive Tree Trimmings
This paper reports on the influence of independent variables in the ethylene glycol/soda pulping of olive wood trimmings [viz. cooking temperature (165–195°C) and time (30–90 min), ethylene glycol concentration (5–15%), soda concentration (2.5–7.5%), and liquid/solid ratio (4/1–6/1)], on the yield and viscosity and holocellulose, -cellulose, and lignin contents of the pulps. By using a central ...
متن کاملCFD Modeling Study of High Temperature and Low Oxygen Content Exhaust Gases Combustion Furnaces
This paper reports a CFD modeling study on the possibility of using high temperature and low oxygen content exhaust gases as oxidant for combustion in an industrial furnace by a written computer program. Under these conditions,the predicted results for the flow and heat transfer properties are compared with those under the several cases of conventional and highly preheated...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Molecules
سال: 2016
ISSN: 1420-3049
DOI: 10.3390/molecules21010085