Leak detection and localization using acoustic emission technique
نویسندگان
چکیده
منابع مشابه
Leak detection and localization using acoustic emission technique
Article history: Received 6 April, 2015 Accepted 10 October 2015 Available online 11 October 2015 This article provides a method of acoustic emission (AE) technique to detect leakage in pipeline and locate the position of the leakage. The AE sensor is made of piezoelectric effect transducer to pick up the acoustic emission signal which is generated from the turbulent flow at the leak position. ...
متن کاملStudy of Damaged Zone around Circular Opening Using Acoustic Emission Technique
One of the methods used to investigate the damaged zone in rock structure is the acoustic emission method. This method is based on receiving the elastic waves that are produced by deformation and cracking of the rock mass around the underground excavation. In this research, a study is conducted on the rock samples by a numerical method to investigate the damaged zone caused by the excavat...
متن کاملLeak detection and localization using models: field results
This paper presents the practical results obtained on the field from two different methods for identifying and locating leaks in water distribution systems using network modeling based algorithms. Both methods are based on the sensitivity analysis of pressure measurements to the demand variation in any node in the distribution system. This work is mainly focused on the obtained results using bo...
متن کاملAcoustic Emission Detection Using Fiber Bragg Gratings
A systematic study of acoustic emission detection using fiber Bragg grating sensors is presented. In this, we attempt to use the fiber Bragg grating to sense the dynamic strain created by a passing ultrasonic wave signal. Our goal is to see if such a sensor is possible, and if so, what the detection sensitivity and limitations will be. To answer these questions, we carried out several experimen...
متن کاملLeak detection in pipes using acoustic pulse reflectometry
This paper discusses the measurement of the acoustical properties of tubular systems using pulse reflectometry. The technique involves the injection of a sound pulse into the object under investigation and the recording of the resultant reflections. Analysis of the reflections gives information about the bore profile and input impedance of the object. The effect of small leaks on both of these ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Engineering Solid Mechanics
سال: 2016
ISSN: 2291-8744,2291-8752
DOI: 10.5267/j.esm.2015.10.003