Lamb wave-based monitoring of shear failure of an adhesive lap joint
نویسندگان
چکیده
منابع مشابه
Fracture mechanics-based life prediction of a riveted lap joint
In this paper, three-dimensional modeling of the fatigue crack growth profiles was performed in a simple riveted lap joint. Simulation results showed that mode I was dominated on the one side of the plates and the crack straightly grew on this side, while the other side of the plates was in a mixed-mode condition and the crack propagation path was not straight on this side. Afterward, the fract...
متن کاملan investigation of the impact of self monitoring on langauge teachers motivational practice and its effect on learners motivation
the central purpose of this study was to conduct a case study about the role of self monitoring in teacher’s use of motivational strategies. furthermore it focused on how these strategies affected students’ motivational behavior. although many studies have been done to investigate teachers’ motivational strategies use (cheng & d?rnyei, 2007; d?rnyei & csizer, 1998; green, 2001, guilloteaux & d?...
Analysis of adhesive-bonded single-lap joint with an interfacial crack and a void
void within the adhesive. Depending upon the number of notches and voids, the specimen is divided into several regions. Assuming that a plane strain state of deformation prevails in the specimen, we write the balance of forces and moments for each section and impose the continuity of displacements, forces and moments at the interfaces between the adjoining sections. By taking the Laplace transf...
متن کاملfracture mechanics-based life prediction of a riveted lap joint
in this paper, three-dimensional modeling of the fatigue crack growth profiles was performed in a simple riveted lap joint. simulation results showed that mode i was dominated on the one side of the plates and the crack straightly grew on this side, while the other side of the plates was in a mixed-mode condition and the crack propagation path was not straight on this side. afterward, the fract...
متن کاملAdhesive Bonding Lap Shear Strength Improvement of Cfr(peek) Laminates by Surface Morphology Modifications
In this paper, an experimental study concerning the effect of surface morphology on mechanical properties of adhesive bonding behaviour of continuous carbon fibres reinforced PEEK was performed. Surface morphology of PEEK composite was varied by sandblasting process. 3D morphological parameters were calculated from interferometry measurements. Surface wettability behaviour was studied by depose...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Diagnostyka
سال: 2018
ISSN: 1641-6414,2449-5220
DOI: 10.29354/diag/95176