Investigation the solidification of Al-4.8 wt.%Cu alloy at different cooling rate by computer-aided cooling curve analysis
نویسندگان
چکیده
منابع مشابه
EFFECT OF COOLING RATE AND GRAIN REFINEMENT ON THE MICROSEGREGATION IN Al-4.8 wt.% Cu ALLOY
Microsegregation is one of the most important phenomena occurs during solidification. It usually results in formation of some unexpected second phases which generally affect the mechanical properties and specially reduce the workability of casting products. The aim of this research is to study the effect of cooling rate and grain refinement on the microsegregation in Al-4.8 wt.% Cu. For this p...
متن کاملThe Solidification Behavior of AA2618 Aluminum Alloy and the Influence of Cooling Rate
In AA2618 aluminum alloy, the iron- and nickel-rich intermetallics formed during solidification are of great effect on the mechanical properties of the alloy at both room temperature and elevated temperatures. However, the solidification behavior of the alloy and the formation mechanism of the intermetallics during solidification of the alloy are not clear. This research fills the gap and contr...
متن کاملA simple Analytical model for solidification cooling rate based on the local heat flux density
A new simple analytical model for prediction of cooling rate in the solidification process based on the local heat flux density extracted during solidification is introduced. In the modeling procedure, a solidifying control volume is considered in the mushy zone in which a heat balance equation is used to derive the present model. As the local heat flux density is a measurable parameter, the pr...
متن کاملEffect of Cooling Rate on Morphology of TiAl3 Particles in Al–4Ti Master Alloy
The Al-4Ti master alloy was fabricated by aluminum (Al) and sponge titanium particle in a resistance furnace at different cooling rates. This work aims to investigate the relationship between the cooling rate and morphology of TiAl3. The microstructure and composition of master alloys at different cooling rates were characterized and analyzed by optical microscopy (OM), X-ray diffraction (XRD),...
متن کاملStudy on Solidification Behavior of Aluminium alloy (LM6) Castings by using Computer aided Simulation software
Method layout of a casting is an important aspect of tooling development. It involves decisions regarding part orientation in mould, parting line, cores, cavity layout, feeders, neck and gating system. An improper method layout leads either poor quality or low yield, which affects the productivity. Method design is mostly carried out manually, using 2D drawing of the cast part. Then tooling is ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallurgical and Materials Engineering
سال: 2014
ISSN: 2217-8961
DOI: 10.5937/metmateng1402107d