Investigation on Machinability Characteristics of Inconel 718 Alloy in Cryogenic Machining Processes
نویسندگان
چکیده
In this innovative work, Inconel 718 alloy turning simulation models under dry and cryogenic machining (Cryo) conditions are developed. The machinability characteristics of the aforementioned were assessed with relation to cutting temperature (Tct) force (Fcf). comparison Tct Fcf results from those obtained identical experimental served as additional evidence effectiveness suggested model. By varying speed, reduction in Cryo was 9.36% 11.98% compared cutting. Regarding experiment simulation, average difference between values for main (Fc) 13.73%, whereas deviation feed (Ff) 14.63%. Response surface methodology (RSM) employed build forecasting settings. These mathematical showed excellent predictive performance able estimate operations settings, according present research. When cutting, reduced temperature, which had a positive impact on alloy’s machinability.
منابع مشابه
Temperature Measurement and Numerical Prediction in Machining Inconel 718
Thermal issues are critical when machining Ni-based superalloy components designed for high temperature applications. The low thermal conductivity and extreme strain hardening of this family of materials results in elevated temperatures around the cutting area. This elevated temperature could lead to machining-induced damage such as phase changes and residual stresses, resulting in reduced serv...
متن کاملInvestigation of Electric Discharge Machining of Inconel 718 Using Special Graphite Electrode
Electric Discharge Machining is a non-conventional machining process, used to machining difficult to machine materials. The major problem faced while doing EDM is high tool wear rate, end wear, corner wear , surface roughness and low material removal rate,. In this research work experimental investigations have been made to find the machining characteristics of high density ultra fine graphite ...
متن کاملInvestigation of Cutting Forces Superalloy Inconel 718
Since the cutting tools used in machining process of super alloys are subjected to high cutting forces, accordingly tools life is reduced, therefore improvement in alloys machining and reducing cutting forces to achieve longer tools life is an essential necessity. In this research, the effect of changes in feed rate on cutting forces in machining process of nickel based super alloys is investig...
متن کاملOptimization of machining parameters of EDM while machining Inconel 718 for form tolerance and orientation tolerance
This paper demonstrates the effectiveness of optimizing multiple characteristics of electrical discharge machining (EDM) of Inconel 718 using copper electrodes having different shapes via Taguchi method-based Grey analysis. The modified algorithm adopted here is used successfully for both detraining the optimum settings of machining parameters and for combining multiple quality characteristic i...
متن کاملEvaluation of Tool Performance With Nanocrystalline Multilayer Coatings on the Machinability of Superalloy Inconel 718
In this paper, the performance of the cutting tool with nanocrystalline multilayer coatings (TiN+TiAlN) for machining of superalloy Inconel 718 in the dry and wet conditions was studied. The multi layer TiN and TiAlN with nanocrystalline structure was applied by physical vapor deposition technique (arc evaporation) on the WC-Co inserts. The results of the ball on disc wear test and the machinin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Lubricants
سال: 2023
ISSN: ['2075-4442']
DOI: https://doi.org/10.3390/lubricants11020082