INVESTIGATION OF WHITE ALLOYED CAST IRON DUCTILITY
نویسندگان
چکیده
منابع مشابه
Cast iron component failure: A metallurgical investigation
A fractured nutcracker was examined for determining the root cause/s for premature fracture/failure. This is one of the common tools used typically for cracking hard nuts. In this study, metallurgical failure analysis techniques namely, visual inspection, optical microscopy, SEM, and hardness tests were used in investigating the broken product. From the metallurgical analysis, it was determined...
متن کاملCast Iron Metallurgy
Cast iron (CI) is one of the oldest materials in commercial use. It has excellent compressive strength and is commonly used for structures that require this property, as well as for water and sewer lines. This article explains CI metallurgy and why the understanding of this metallurgy is key to understanding other ferrous materials and alloys. The composition of cast iron (CI) varies significan...
متن کاملEffect of Chromium and Titanium on Structure and Properties of White Cast Iron
Joint effect of chromium and titanium on structure and properties of hard castings is investigated in present work. It is determined that titanium neutralizes carbide-forming effect of chromium in the investigated concentration intervals. In the presence of titanium, the effect of chromium on hardness of samples is lower as compared to its individual effect. Therefore, addition of only chromium...
متن کاملTribological Behavior of Reinforced and Unreinforced High Chromium Cast Iron
In this paper, the metal matrix composites containing 22 wt % Cr, 2.5 wt % C and 2 to 16 volume percent TiC were processed by solidifying Fe-Cr-Ti-C in which precipitation of titaniumcarbide and chromium carbide occurred. The microstructure and abrasion resistance of in-situ synthesized composites were compared with the unreinforced high chromium white cast iron (HCWCI) containing 22 w. t. % C...
متن کاملCutting Forces and Tool Wear Investigation for Face Milling of Bimetallic Composite Parts Made of Aluminum and Cast Iron Alloys
Bimetallic parts are used in many industries for weight and cost reduction of workpieces working under high loads and wear. One application for this type of composite material is in automotive industry. In this work the tool wear and cutting forces in the face milling of bimetallic parts made of aluminum and cast iron were investigated. A356 and GG25 alloys that are common materials for bimetal...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of Bryansk state technical university
سال: 2019
ISSN: 1999-8775
DOI: 10.30987/article_5c652633961a58.10645526