Investigation of Inlet Boundary Conditions on Capillary Membrane with Porous Wall during Dead-End Backwash
نویسندگان
چکیده
منابع مشابه
Investigation of Inlet Boundary Conditions on Capillary Membrane with Porous Wall during Dead-End Backwash
under investigation. The early models to solve Navier-Stokes equation for a laminar flow in porous tube were proposed in Berman [1] and Yuan [2] and extended by Bernales [3]. Berman [1] presented a solution to the two-dimensional model in laminar flow in channels with uniform wall suction. This study was extended to cylindrical coordinates to investigate suction as well as injection in flow alo...
متن کاملNumerical Simulation of Particle Distribution in Capillary Membrane during Backwash
The membrane filtration with inside-out dead-end driven UF-/MF- capillary membranes is an effective process for particle removal in water treatment. Its industrial application increased in the last decade exponentially. To date, the research activities in this field were aimed first of all at the analysis of filtration phenomena disregarding the influence of backwash on the operation parameters...
متن کاملInvestigation of purge time in cathodic dead-end mode PEMFC
Recently, special type of fuel cells has been developed that operates in a Dead End mode. Working in this condition, the Dead-End fuel cell is supplied withhydrogen almost at the same rate of consumption. It is noteworthy to mention thatall of the water transport mechanisms have been considered in this simulation.Water accumulation that is directly proportional to the cell current is of a grea...
متن کاملInlet Boundary Conditions for Embedded Les
The paper evaluates a new method to prescribe synthesized turbulent inlet boundary conditions. The method can also be used when prescribing turbulent fluctuations at an interface between (U)RANS and LES regions when the flow enters the LES region. When making LES, DES or hybrid LES-RANS a precursor channel DNS is often used. The disadvantage of this method is that it is difficult to re-scale th...
متن کاملBoundary Conditions for a Capillary Fluid in Contact with a Wall
Contact of a fluid with a solid or an elastic wall is investigated. The wall exerts molecular forces on the fluid which is locally strongly nonhomogeneous. The problem is approached with a fluid energy of the second gradient form and a wall surface energy depending on the value of the fluid density at the contact. From the virtual work principle are obtained limit conditions taking into account...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Membrane Science & Technology
سال: 2015
ISSN: 2155-9589
DOI: 10.4172/2155-9589.1000138