Investigation of Flank Wear in Hard Turning of AISI 52100 Grade Steel Using Multilayer Coated Carbide and Mixed Ceramic Inserts
نویسندگان
چکیده
منابع مشابه
Optimization of Surface Roughness in Hard Turning of AISI 4340 Steel using Coated Carbide Inserts
The use of multilayer coated carbide tool in hard turning has several advantages over grinding process such as; reduction of processing costs, increased productivity, short cycle time, compatible surface roughness and less enviornment problems without the use of cutting fluid. In the present study, an attempt has been made to evaluate the performance of multilayer coated carbide inserts during ...
متن کاملExperimental Investigation of surface roughness in dry turning of AISI 4340 alloy steel using PVD- and CVD- coated carbide inserts
The performance of coated inserts was described using Response Surface Methodology (RSM) when turning AISI 4340 alloy steel using single layer PVD and triple layer CVD coated inserts. Cutting tests were performed under dry cutting conditions so as to reduce the effects of cooling agents on the environment. Surface roughness (Ra) was the main response variable investigated. The experimental plan...
متن کاملModeling of Tool Wear in Turning EN 31 Alloy Steel using Coated Carbide Inserts
The experimental investigations of the tool wear in turning of EN 31 alloy steel at different cutting parameters are reported in this paper. Mathematical model has been developed for flank wear using response surface methodology. This mathematical model correlates independent cutting parameters viz. cutting speed, feed rate and depth of cut with dependent parameters of flank wear. This model is...
متن کاملTool Wear and Surface Roughness in Turning AISI 8620 using Coated Ceramic Tool
The purpose of this research paper is to study the tool wear and surface roughness of AISI 8620 material using coated ceramic tool by turning process. Ceramic cutting tools have outstanding material hardness, resistance to high temperatures, wear resistance, chemical stability and hot hardness. Ceramic tool with Al2O3 + TiC (golden) coating was used to investigate the surface roughness and tool...
متن کاملExperimental Study & Modeling of Surface Roughness in Turning of Hardened AISI 4340 Steel Using Coated Carbide Inserted
Turning of hardened steels using a single point cutting tool has replaced the cylindrical grinding now as it offers attractive benefits in terms of lower equipment costs, shorter set up time, fewer process setups, higher material removal rate, better surface quality and elimination of cutting fluids compared to cylindrical grinding. In order to obtain desired surface quality by machining, pr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Manufacturing
سال: 2018
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2018.02.053