Investigation of dualband fan-shaped microstrip bandpass filter
نویسندگان
چکیده
منابع مشابه
Microstrip Dual-Band Bandpass Filter Using U-Shaped Resonators
Coupled resonators are widely used in the design of filters with dual-passband responses. In this paper, we present a dual-band bandpass filter using only couplings between adjacent resonators without cross-couplings. The dual-band bandpass filter with centre frequencies of 1747MHz and 1879MHz respectively is designed and fabricated using microstrip U-shaped resonators. Using the coupled resona...
متن کاملA Dualband T-Shaped Microstrip Antenna for Wearable Application
In this paper, an T shaped dualband microstrip antenna fed by coaxial feed is presented for wearable applications in the ISM band (2.42.5GHz,5.7-5.8GHz).This antenna provides dual band performance. As for the wearable applications, we use a felt as the substrate to make sure the antenna can bend follow human body. The overall size of the proposed antenna is 44mm*36mm*3mm. Different parameters l...
متن کاملDesigning Microstrip Bandpass Filter at 3.2 GHz
Abstract: Bandpass filters play a significant role in wireless communication systems. Transmitted and received signals have to be filtered at a certain center frequency with a specific bandwidth. In designing of microstrip filters, the first step is to carry out an approximated calculation based on using of concentrated components like inductors and capacitors. After getting the specifications ...
متن کاملA Miniaturized Triple-Mode Microstrip Bandpass Filter
A Novel miniaturized triple-mode microstrip bandpass filter (BPF) using space mapping (SM) technique is presented in this paper. Three operating frequencies at 1.9 GHz, 2.14 GHz and 2.45 GHz are excited that are used for CDMA, WCDMA and RFID applications, respectively. In the proposed design, Substrate manufactured from RT_DURRIOD_5880 with dielectric constant of 2.21 and height of 20 mil that ...
متن کاملCompact Microstrip Bandpass Filter with Multispurious Suppression
A compact microstrip bandpass filter (BPF) with multispurious suppression is presented. The filter consists of two coupled half-wavelength stepped impedance resonators (SIRs) and tapped input/output (I/O) lines. With tuning the impedance ratio (K) and length ratio (α) of SIRs, a very wide stopband can be easily achieved. The filter is designed at 2.4 GHz (f0) with a wide stopband to 20GHz (8.16...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TELKOMNIKA (Telecommunication Computing Electronics and Control)
سال: 2021
ISSN: 2302-9293,1693-6930
DOI: 10.12928/telkomnika.v19i1.16507