Introduction for Fine Line Patterning Technology such as Line and Space 5 μm using by Surface Finishing Chemicals

Pain assessment in special patient groups such as those with dementia: at the finishing line or just starting from scratch?

There has been tremendous progress in the methodology of pain assessments. This applies to both clinical and experimental pain. Books can be filled with the description of manifold instruments. One might assume that we can settle back and focus our efforts exclusively on the clinical applications of this arsenal. However , most of these tools for pain assessment have been designed for middle-ag...

New technology for on-line surface inspection in continuous casting

The fine line.

About 20 of us who use wheclchairs were drinking coffee and enjoying a perfect fall morning on the University of Illinois campus in Champaign. Thiny years had rassed since we had visited 33 cities in South Africa and Rhodesia in 6 weeks to demonstrate that people with severe disabilities shot archery, swam and rJayed basketball aJJ day, gave speeches all evening, and raised hell mOSt of the nig...

Temic 0.35 μm technology and sea of gates for space

We will report how we have hardened our 0.35 μm standard process for space, which we have installed in our 8” wafer fab in Rousset, France, and the resulting radiation test results with the MH1RT sea of gates test vehicle and a 1 Mbit SRAM demonstrating a capability in excess of 200 Krads for total dose, and 116 MeV/mg.cm2 for latch up. SEU hardened memory cells have been designed with the obje...

Finishing Line Scheduling in the steel industry

A new solution for large-scale scheduling in the steelmaking industry, called Finishing Line Scheduling (FLS), is described. FLS in a major steel mill is a task to create production campaigns (specific production runs) for steel coils on four continuous processes for a one-month horizon. Two process flows are involved in FLS, and the balancing of the two process flows requires resolving conflic...