Internal examination of mid-infrared chalcogenide glass optical fiber preforms and fiber using near-infrared imaging [Invited]

Estimating Nitrogen and Acid Detergent Fiber Contents of Grass Species using Near Infrared Reflectance Spectroscopy (NIRS)

Chemical assessments of forage clearly determine the forage quality; however, traditional methods of analysis are somehow time consuming, costly, and technically demanding. Near Infrared Reflectance Spectroscopy (NIRS) has been reported as a method for evaluating chemical composition of agriculture products, food, and forage and has several advantages over chemical analyses such as conducting c...

On-chip mid-infrared gas detection using chalcogenide glass waveguide

Mid-infrared supercontinuum generation in a suspended-core As2S3 chalcogenide microstructured optical fiber.

We demonstrate the supercontinuum (SC) generation in a suspended-core As(2)S(3) chalcogenide microstructured optical fiber (MOF). The variation of SC is investigated by changing the fiber length, pump peak power and pump wavelength. In the case of long fibers (20 and 40 cm), the SC ranges are discontinuous and stop at the wavelengths shorter than 3500 nm, due to the absorption of fiber. In the ...

Chalcogenide Glass Optical Waveguides for Infrared Biosensing

Due to the remarkable properties of chalcogenide (Chg) glasses, Chg optical waveguides should play a significant role in the development of optical biosensors. This paper describes the fabrication and properties of chalcogenide fibres and planar waveguides. Using optical fibre transparent in the mid-infrared spectral range we have developed a biosensor that can collect information on whole meta...

Highly efficient cascaded amplification using Pr(3+)-doped mid-infrared chalcogenide fiber amplifiers.

We computationally investigate cascaded amplification in a three-level mid-infrared (IR) Pr(3+)-doped chalcogenide fiber amplifier. The overlap of the cross-sections in the transitions (3)H(6)→(3)H(5) and (3)H(5)→(3)H(4) enable both transitions to simultaneously amplify a single wavelength in the range between 4.25 μm and 4.55 μm. High gain and low noise are achieved simultaneously if the signa...