Interlaminar shear strength study on CFRP/Al hybrid laminates with different properties
نویسندگان
چکیده
منابع مشابه
Effect of TEOS Electrospun Nanofiber Modified Resin on Interlaminar Shear Strength of Glass Fiber/Epoxy Composite
Interlaminar shear strength (ILSS) of fiber reinforced polymer composite is an important property for most of the structural applications. Matrix modification is an effective method used to improve the interlaminar shear strength of composite. In this paper, EPON 862/w epoxy system was modified using Tetraethyl orthosilicate (TEOS) electrospun nanofibers (ENFs) which were produced using electro...
متن کاملInfluence of titanium carbide on the interlaminar shear strength of carbon fibre laminate composites
The potential use of carbon fibre laminate composites is limited by the weak out-ofplane properties, especially delamination resistance. The effect of incorporating titanium carbide to the mesophase pitch matrix precursor of carbon fibre laminate composites on interlaminar shear strength is studied both on carbonised and graphitised composites. The presence of titanium carbide modifies the opti...
متن کاملTHEORETICAL AND NUMERICAL STUDY ON THE STRENGTHENED STEEL PLATE SHEAR WALLS BY FRP LAMINATES
In this paper, nonlinear behavior of strengthened steel plate shear walls (SPSWs) by FRP laminates theoretically and numerically has been investigated. In the first part, a new method, “the composite-plate frame Interaction (C-PFI) method”, has been introduced to predict the shear behavior of the composite steel plate shear wall systems (CSPSWs). In the second part, several models of one-story ...
متن کاملInvestigation on the Mechanical Properties of SMA/GF/Epoxy Hybrid Composite Laminates: Flexural, Impact, and Interfacial Shear Performance
In this article, hybrid composite laminates with shape memory alloy (SMA) and glass fiber (GF) as the reinforced phase, and epoxy resin as the host material, were manufactured by vacuum-assisted resin injection (VARI) processing. The SMA wires were embedded into the GF/epoxy composites with three kinds of modes. The effect of SMA content and the position on the flexural, low-velocity impact per...
متن کاملExperimental Study on Shear Performance of Innovated Precast Shear Walls with Different Yield Strength Grades of Reinforcements
Result and Conclusion: The results show that strength of horizontal bars has a little influence on the hysteretic behavior and the deformation ability. While the decrease of the strength of horizontal bars can increase the yield displacement and the peak displacement of the hollow slab shear walls. The hollow slab shear wall structure has good deformation capacity, and the brittle shear failure...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Frattura ed Integrità Strutturale
سال: 2019
ISSN: 1971-8993
DOI: 10.3221/igf-esis.51.32