Influences of tip leakage flows on flow field at design condition in transonic centrifugal compressor with splitter blade
نویسندگان
چکیده
منابع مشابه
Turbine Blade Tip Leakage Flow Control: Thick/Thin Blade Effects
An experiment was conducted in a linear cascade of Pak-B blades for an exit Mach number of 0.3 to simulate the flow in the tip-gap region of a low pressure turbine blade row. The experiment focused on the independent effects of thickness-to-gap and gapto-chord ratios on the tip-gap flow behavior. Two extreme gap-to-chord ratios of 5% and 8% were chosen, for which four thickness-to-gap ratios we...
متن کاملEffect of blade profile on the performance characteristics of axial compressor in design condition
The choice of geometrical shape of the blades has a considerable effect on aerodynamic performance and flow characteristics in axial compressors. In this paper, the effects of the blades shape on the aerodynamic design characteristics are investigated based on Streamline Curvature Method (SCM). Initially, the Streamline Curvature Method (SCM) is used for designing a two-stage axial compressor. ...
متن کاملUnsteady Transonic Flows in an Axial Flow Compressor*
Introduction. This paper deals with some transonic flow problems for the supersonic axial flow compressor: these arise in connection with flutter analysis for fan blading. Very detailed solutions for unsteady plane transonic flows through a cascade of flat plates have been given by Goldstein Braun and Adamczyk (1977) and Nagashima and Whitehead (1977), see also Goldstein (1975), Kurosaka (1974)...
متن کاملEffects of Different Turbulence Models in Simulation of Unsteady Tip Leakage Flow in Axial Compressor Rotor Blades Row
Characteristics of rotor blade tip clearance flow in axial compressors can significantly affect their performance and stable operation. It may also increase blade vibrations and cause detrimental noises. Therefore, this paper is contributed to investigate tip leakage flow in a low speed isolated axial compressor rotor blades row. Simulations are carried out on near-stall condition, which is val...
متن کاملAn Investigation into Turbine Blade Tip Leakage Flows at High Speeds
The effect of the blade tip geometry of a high pressure gas turbine is studied experimentally and computationally for high speed leakage flows. For this purpose two simplified models are constructed, one models a flat tip of the blade and the second models a cavity tip of the blade. Experimental results are obtained from a transonic wind tunnel to show the static pressure distribution along the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the JSME (in Japanese)
سال: 2016
ISSN: 2187-9761
DOI: 10.1299/transjsme.16-00159