Influence of process parameters on grain refinement in AA1050 aluminum during cold rolling
نویسندگان
چکیده
منابع مشابه
Influence of Process Parameters on Grain Refinement in AA1050 Aluminum During Cold Rolling
The microstructure evolution during cold rolling of commercial purity AA1050 aluminum is investigated through numerical simulations. A finite strain elasto-viscoplastic constitutive model is employed, where the dislocation density and average grain size are taken as variables characterizing the deformed microstructure. Grain size evolution due to dynamic recrystallization is considered and the ...
متن کاملMagnificent Grain Refinement of Al-Mg2Si Composite by Hot Rolling
The effect of chemical composition and the hot rolling operations on the microstructure and mechanical properties of in situ aluminum matrix composite with Mg2Si phase as the reinforcement was studied. It was revealed that the modification by phosphorous results in the rounder (more spherical) primary and secondary (eutectic) magnesium silicide intermetallics. During hot rolling, the primary pa...
متن کاملEffects of Homogenization Conditions and Hot Rolling Parameters on Grain Refinement of an As-Cast 301 Stainless Steel
In this work, effects of homogenization time of 3 to 13 h at 1200 °C on the grain refinement of as-cast AISI 301 stainless steel after different hot rolling conditions were investigated. The results showed that the minimum grain size of 16±7 mm was achieved when homogenization took place at 1200 °C for 9 h followed by hot rolling at temperature range of 1000–1200 °C with strain of 0.8 and stra...
متن کاملFEM Analysis of Effect of Rolling Parameters on Cold Rolling Process
ISSN 2277 – 5056 | © 2012 Bonfring Abstract--A FEM simulation study was carried out to investigate the influence of the rolling parameters on the rolling process. Using commercial FEM software, ABAQUS, a number of cases were studied. In this paper, a twodimensional Elastic-plastic finite element model to simulate the cold rolling of thick strip with different roll angular velocity and roll diam...
متن کاملPreparation of Some Specific Grain Boundaries in Aluminum for Hrem Studies by Cold Rolling and Annealing
The preparation of bicrystals with an aim to study grain boundary structure by high resolution electron microscopy (HREM) requires a careful approach. Primary attention needs to be directed towards the orientations of the crystals forming a boundary so that atomic resolution images of the bicrystai can be achieved by HREM. Mader, Necker and Bailuffi (1) have reviewed the limitations of present ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Mechanical Sciences
سال: 2013
ISSN: 0020-7403
DOI: 10.1016/j.ijmecsci.2012.11.016