INFLUENCE OF CURING TEMPERATURE CHANGE TO PERFORMANCE OF FLY ASH AS CEMENTITIOUS MATERIAL

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Performance of Fly Ash as Fill Material for Embankment Model on Soft Soil

Fly ash is one of coal ashes resulted from power plants using coal to generate electricity. As a result of large utilization of coal, large volumes of coal ash produced as waste material. Direct use of these materials in construction projects, not only provides a promising solution to the disposal problem, but also as an alternative for structural fills material. High shear strength, low compre...

متن کامل

Performance evaluation of cement stabilized fly ash-GBFS mixes as a highway construction material.

Fly ash and granulated blast furnace slag (GBFS) are major by-products of thermal and steel plants, respectively. These materials often cause disposal problems and environmental pollution. Detailed laboratory investigations were carried out on cement stabilized fly ash-(GBFS) mixes in order to find out its suitability for road embankments, and for base and sub-base courses of highway pavements....

متن کامل

An Experimental Study on Utilization of Slag and Fly Ash as an Alternative Cementitious Binder

This study investigates the utilization of slag and fly ash (FA) as alternative cementitious binder. Combination of 60% slag and 40% FA was used as new binder. In addition, for activation of slag and FA, sodium hydroxide and calcium hydroxide was used as a chemical activator by 5% weight of the binder, separately. Water to binder and sand to binder ratios was kept 0.55 and 3 in mortar preparati...

متن کامل

Influence of High Temperatures on Flexural Strength of Foamed Concrete Containing Fly Ash and Polypropylene Fiber

In this study, the elevated temperature flexural strengths of lightweight foamed concrete (LFC) containing fly ash (FA) and polypropylene fiber (PF) was investigated experimentally and statistically. The variables included were the temperature degrees (in a range of 20 to 600°C), LFC densities of 600, 800, 1000, 1200 and 1400 kg/m3 and additive content. Two mixes were made by replacing 15% and ...

متن کامل

Comparative Study of Alkali-Activated Fly Ash Manufactured Under Pulsed Microwave Curing and Thermal Oven Curing

This paper compares the alkali-activated fly ash (AAFA) manufactured with thermal oven curing and pulsed microwave curing methods. Fly ash activated by 8M NaOH solution at a liquid to solid ratio of 0.3 was cured by thermal oven at 85°C and domestic microwave oven, respectively. Apart from compressive strength test, the temperature profiles of AAFA samples were captured by thermal camera. React...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Japan Society of Civil Engineers, Ser. E2 (Materials and Concrete Structures)

سال: 2011

ISSN: 2185-6567

DOI: 10.2208/jscejmcs.67.482