Increased durability of sol–gel derived MgF2 antireflective coatings capped by vapor deposition
نویسندگان
چکیده
Abstract Porous MgF 2 antireflective ?/4 films were prepared by sol–gel processing and coated with an additional top layer electron beam evaporation. Scanning Electron Microscopy was applied to characterize the microstructure of bilayer assembly. It can be shown that has a protective effect in terms abrasion resistance reduced solubility water. In second step thickness two film systems been matched achieve optimum antireflection properties.
منابع مشابه
Determination of Optical Properties in Germanium Carbon Coatings Deposited by Plasma Enhanced Chemical Vapor Deposition
In this research, Germanium-carbon coatings were deposited on ZnS substrates by plasma enhanced chemical vapor deposition (PECVD) using GeH4 and CH4 precursors. Optical parameters of the Ge1-xCx coating such as refractive index, Absorption coefficient, extinction coefficient and band gap were measured by the Swanepoel method based on the transmittance spectrum. The results showed that the refra...
متن کاملChemical Vapor Deposition of Antimicrobial Polymer Coatings
There is large and growing interest in making a wide variety of materials and surfaces antimicrobial. Initiated chemical vapor deposition (iCVD), a solventless lowtemperature process, is used to form thin films of polymers on fragile substrates. To improve research efficiency, a new combinatorial iCVD system was fabricated and used to efficiently determine the deposition kinetics for two new po...
متن کاملGrowth of coatings on nanoparticles by photoinduced chemical vapor deposition
Photoinduced chemical vapor deposition was used to grow organic coatings on NaCl nanoparticles. Aerosolized nanoparticles were mixed with a vapor-phase coating reactant and introduced into a room-temperature, atmospheric-pressure cell, where the mixture was exposed to 172-nm radiation from a Xe2* excimer lamp. Several coating reactants were investigated; the most successful was methyl methacryl...
متن کاملTi-Cr-N Coatings Deposited by Physical Vapor Deposition on AISI D6 Tool Steels
In this study, physical vapor deposition (PVD) Ti-Cr-N coatings were deposited at two different temperatures 100 and 400ºC on hardened and tempered tool steel substrates. The influence of the applied deposition temperature on the physical and mechanical properties of coatings such as roughness, thickness, phase composition, hardness and Young’s modulus were evaluated. Phase compositions were st...
متن کاملSelf-cleaning antireflective optical coatings.
Low-cost antireflection coatings (ARCs) on large optical surfaces are an ingredient-technology for high-performance solar cells. While nanoporous thin films that meet the zero-reflectance conditions on transparent substrates can be cheaply manufactured, their suitability for outdoor applications is limited by the lack of robustness and cleanability. Here, we present a simple method for the manu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Sol-Gel Science and Technology
سال: 2022
ISSN: ['1573-4846', '0928-0707']
DOI: https://doi.org/10.1007/s10971-022-05977-9