In situ stress analysis of multilayer environmental barrier coatings
نویسندگان
چکیده
منابع مشابه
In-situ Stress Analysis of Multilayer Environmental Barrier Coatings
The biaxial stress and thermal expansion of multilayer doped-aluminosilicate environmental barrier coatings were measured in-situ during cooling using microfocused high-energy X-rays in transmission. Coating stresses during cooling from 1000oC were measured for as-sprayed and thermally cycled samples. In the as-sprayed state, tensile stresses as high as 75 MPa were measured in the doped-alumino...
متن کاملStresses in Ytterbium Silicate Multilayer Environmental Barrier Coatings
The internal stresses of plasma-sprayed multilayer ytterbium disilicate environmental barrier coatings were measured using microfocused high-energy X-rays in a transmission geometry. Stresses were measured for as-sprayed and ex-situ heat-treated ytterbium disilicate topcoats at room temperature and during in-situ heating and cooling experiments. In-situ loading experiments were also performed o...
متن کاملDelamination of multilayer thermal barrier coatings
Multilayer thermal barrier coatings (TBCs) on superalloy substrates are comprised of an intermetallic bond coat, a thermally grown oxide (TGO) layer, and a porous zirconia top coat that provides thermal protection. The TGO attains a thickness of 1±10 lm prior to failure, while the bond coat and zirconia layer are each about 50±100 lm thick. The preferred method for manufacturing TBCs comprises ...
متن کاملPlasma spray deposition of tri-layer environmental barrier coatings
n air plasma spray process has been used to deposit tri-layer environmental barrier coatings consisting of a silicon bond coat, a mullite interiffusion barrier, and a Yb2SiO5 top coat on SiC substrates. Solidified droplets in as-deposited Yb2SiO5 and mullite layers were discovered to be epleted in silicon. This led to the formation of an Yb2SiO5 + Yb2O3 two-phase top coat and 2:1 mullite (2Al2O...
متن کاملMeasurement and Analysis of Narrow-band Surface Acoustic Waves in Ceramic Environmental Barrier Coatings
A laser-based ultrasonic system is used to measure the mechanical properties and thickness of mullite environmental barrier coatings deposited on SiC substrates. Narrow-band surface acoustic waves (SAWs) are generated with an amplitude modulated laser source, and a photorefractive crystal based interferometer coupled to a lock-in amplifier is used to detect the resulting surface displacement. T...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Powder Diffraction
سال: 2009
ISSN: 0885-7156,1945-7413
DOI: 10.1154/1.3120602