In-Situ Observation in Adhesive Layer of Adhesively Bonded Butt Joints with a Thin Adherend under Cyclic Loading.
نویسندگان
چکیده
منابع مشابه
Experimental investigation of mode I fracture energy of adhesively bonded joints under impact loading conditions
Background Recently, the automotive industry has paid attention to multi-material structures to reduce CO2 emission. Hence, the use of light-weight and high-strength materials such as Al–Mg alloys, high-tensile-strength steel and carbon-fiber-reinforced plastics (CFRP) is essential to lighten the vehicle weight [1]. Joining methods for these dissimilar materials are the key to apply them into t...
متن کاملAnalytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints Under Mechanical Loadings
In this paper, considering an adhesively bonded composite single-lap joint, a novel approach is presented to predict the peel and shear stress distributions of the adhesive layer for an ASTM standard test sample. In current method, the equilibrium equations are derived using the energy method and based on the Timoshenko’s beam theory. Two solution procedures then are discussed, one of which rep...
متن کاملComputational Models of Adhesively Bonded Joints
Simulations using the Finite Element Method (FEM) play an increasingly important role in the design process of joints and fasteners in the aerospace industry. In order to utilize the potential of such adhesive bonding, there is an increasing need for effective and accurate computational methods. The geometry and the nature of an adhesive joint are, however, not so simple to describe effectively...
متن کاملThe influence of adhesive constitutive parameters in cohesive zone finite element models of adhesively bonded joints
0020-7683/$ see front matter 2008 Elsevier Ltd. A doi:10.1016/j.ijsolstr.2008.11.016 Abbreviations: ASTM, ASTM International; CC, co continuous cohesive zone method; CPE4I, bilinear inc elements; DACE, design and analysis of computer cantilever beam; DCZM, discrete cohesive zone metho finite element; LEFM, linear elastic fracture mech sampling; SLJ, single lap joint; TTL, trapezoidal tractio * ...
متن کاملFailure Procedure in Adhesive Composite Joints under Different Types of Loading
In this paper, we have used numerical simulation to study failure of adhesive joints in composite plates. To determine the failure load, adhesive joints are subjected to different types of loading and gradual failure of the joint is studied using the finite element method. The composite material failure theory is implemented into the FEM software. Also different geometries for the joint edge ar...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 2000
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.49.561