In Situ N‐Doped Graphene and Mo Nanoribbon Formation from Mo 2 Ti 2 C 3 MXene Monolayers

Stress-induced Transformations in Ti-mo Alloys

Na incorporation in Mo and CuInSe 2 from production processes

Results of characterization of thin "lms of Mo deposited by DC magnetron sputtering on soda-lime glass (Mo/SLG) and CuInSe 2 (CIS) on Mo/SLG are presented. The primary objective of the work was to clarify the factors determining the concentration of Na in commercial-grade CIS. Mo "lms were deposited by three laboratories manufacturing CIS thin "lm solar cells. Analysis was by secondary ion mass...

Surface characterization of a - Mo 2 C ( 0001 )

The (0001) surface of a-Mo2C prepared by Ar ion bombardment and annealing was characterized using X-ray photoelectron spectroscopy and low energy electron diffraction (LEED). An ion-bombarded surface annealed to 1000 K exhibits an Mo/C ratio of 2.2, characteristic of an Mo-terminated surface. The Mo-terminated surface exhibits a complex, but predominantly ‘(1×1)’ hexagonal LEED pattern on a dif...

Mechanism of Bainite Transformation in Fe-Cr-Mo-V-Ti-C Steel

The kinetics and mechanism of bainite transformation have been studied in Fe-Cr-Mo-V-Ti-C steel high speed dilatometry backed by thermodynamic analysis. The complete transformation of austenite, however, has not occurred at any reported temperature. Obtained results confirm the incomplete reaction phenomenon with the cessation of the bainite transformation well before the paraequilibrium is ach...

Ag(2.54)Tl(2)Mo(12)Se(15): a new structure type containing Mo(6) and Mo(9) clusters.

The novel structure-type Ag(2.54)Tl(2)Mo(12)Se(15) (silver thallium molybdenum selenide) is built up of Mo(6)Se(i)(8)Se(a)(6) and Mo(9)Se(i)(11)Se(a)(6) cluster units in a 1:2 ratio, which are three-dimensionally connected to form the Mo-Se network. The Ag and Tl cations are distributed in several voids within the cluster network. Three of the seven independent Se atoms and one Tl atom lie on s...