Improving the Forming Quality of Laser Dynamic Flexible Micropunching by Laser Pre-Shocking
نویسندگان
چکیده
منابع مشابه
control of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولPrediction of Bending Angle for Laser Forming of Tailor Machined Blanks by Neural Network
Tailor-made blanks are sheet metal assemblies with different thicknesses and/or materials and/or surface coatings. A monolithic sheet can be machined to make the required thickness variations that is referred as tailor machined blanks. Due to the thickness variation in tailor machined blanks, laser bending of these blanks is more complicated than monolithic plates. In this article, laser formin...
متن کاملNumerical and Experimental Study of Effect of Scan Velocity in Laser Forming by Temperature Gradient Mechanism
In this paper the process of laser forming has been investigated using an analytical and an experimental method for three levels scans velocity. A coupled analysis has been performed in ANSYS®. Also in order to prove the predictive methods, experiments on thin sheet metals have been done when a laser of a fair power was used. Before done, experiments were designed with full factorial chosen as ...
متن کاملImproving the output beam quality of multimode laser resonators.
Multimode laser operation is usually characterized by high output power, yet its beam quality is inferior to that of a laser with single TEM00 mode operation. Here we present an efficient approach for improving the beam quality of multimode laser resonators. The approach is based on splitting the intra-cavity multimode beam into an array of smaller beams, each with a high quality beam distribut...
متن کاملGas Dynamic Effects On Laser Cut Quality
Cutting efficiency and quality are very sensitive to gas jet pressure and nozzle standoff distance. Do a high gas pressure and a small standoff distance necessarily give better material removal capability and cutting quality? Simple experiments to measure the mass flow rate were carried out for two types of geometry: a circular hole and a linear cut directly underneath an axisymmetric nozzle. T...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2020
ISSN: 1996-1944
DOI: 10.3390/ma13173667