Impact Fracture Toughness of Ceramic-Reinforced Metals at Elevated Temperatures.
نویسندگان
چکیده
منابع مشابه
Evaluation of in situ fracture toughness of ceramic coatings at elevated temperature by AE inverse analysis
This paper describes acoustic emission (AE) measurement at elevated temperature by laser techniques. AE signals originated from microfracture of Al2O3/SUS304 plasma sprayed coatings were detected using a laser interferometer during thermal cycling. The radii of microcracks were evaluated by the inverse analysis of AE signals. Microcrack radii were also studied by the numerical analysis based on...
متن کاملDynamic Fracture Initiation Toughness of a Gamma (Met-PX) Titanium Aluminide at Elevated Temperatures
Recently, a new generation of titanium aluminide alloy named Gamma-Met PX (GKSS, Geesthacht, Germany) has been developed with better rolling and postrolling characteristics. Previous work on this alloy has shown the material to have higher strengths at room and elevated temperatures when compared with other gamma titanium aluminides. In particular, this new alloy has shown increased ductility a...
متن کاملFlow of Fiber-Reinforced Cement Slurries at Elevated Temperatures
Cement slurries are used for the construction of oil wells as deep as 30,000 ft (9,000 m). The severe performance requirements for such materials have prompted the search for appropriate fiber reinforcement to improve the slurry’s tensile strength, impact resistance, and fracture toughness, without decreasing its pumpability. A continuum theory for dilute suspensions of large-aspect-ratio parti...
متن کاملFatigue Life Prediction of Fiber-Reinforced Ceramic-Matrix Composites with Different Fiber Preforms at Room and Elevated Temperatures
In this paper, the fatigue life of fiber-reinforced ceramic-matrix composites (CMCs) with different fiber preforms, i.e., unidirectional, cross-ply, 2D (two dimensional), 2.5D and 3D CMCs at room and elevated temperatures in air and oxidative environments, has been predicted using the micromechanics approach. An effective coefficient of the fiber volume fraction along the loading direction (ECF...
متن کاملTHE DEFORMATION BEHAVIOR OF AZ31 MAGNESIUM ALLOY AT ELEVATED TEMPERATURES
AZ31 magnesium alloy is considered as a promising alloy in various applications and industries. Furthermore, to design a proper hot working process (rolling, forging and extrusion), the assessment of hot working behaviour of the alloy is necessary. Accordingly, the hot deformation behaviour of AZ31 alloy was studied through hot compression testing method This was carried out in a wide range of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1991
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.57.1073