Hybrid Carbon Microfibers-Graphite Fillers for Piezoresistive Cementitious Composites
نویسندگان
چکیده
منابع مشابه
Analysis of Graphite Reinforced Cementitious Composites
This paper describes analytical methods that can be used to determine the deflections and stresses in highly compliant graphite-reinforced cementitious composites. It is demonstrated that the standard transform section method fails to provide accurate results when the elastic modulus ratio exceeds 20. So an alternate approach is formulated by using the rule of mixtures to determine a set of eff...
متن کاملPiezoresistive effect in epoxy-graphite composites
In this work, we investigate the piezoresistive response of epoxy-graphite composites. A resistive thick-film Wheatstone bridge is deposited by screen-printing onto a beam, a weight is then applied on the tip of the beam and the resulting electrical signal response is recorded, allowing the calculation of the gauge factor. The characterization was made at room temperature, 65°C and 100°C for di...
متن کاملA Method for Producing Structurally Equivalent Graphite Reinforced Cementitious Composites
This paper describes a method to duplicate the structural performance of a graphite-reinforced cementitious composite as the mix proportions and constituents of its cementitious matrix are varied. This is accomplished by placing a test specimen constructed using a modified mixture over a reinforcing scheme identical to that of a control standard and then matching the end deflection of these sam...
متن کاملExperimental Investigation of the Piezoresistive Properties of Cement Composites with Hybrid Carbon Fibers and Nanotubes
Cement-based sensors with hybrid conductive fillers using both carbon fibers (CFs) and multi-walled carbon nanotubes (MWCNTs) were experimentally investigated in this study. The self-sensing capacities of cement-based composites with only CFs or MWCNTs were found based on preliminary tests. The results showed that the percolation thresholds of CFs and MWCNTs were 0.5-1.0 vol.% and 1.0 vol.%, re...
متن کاملStrain and Cracking Surveillance in Engineered Cementitious Composites by Piezoresistive Properties
Engineered Cementitious Composites (ECCs) are novel cement-based ultraductile materials which is crack resistant and undergoes strain hardening when loaded in tension. In particular, the material is piezoresistive with changes in electrical resistance correlated with mechanical strain. The unique electrical properties of ECC render them a smart material capable of measuring strain and the evolu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors
سال: 2021
ISSN: 1424-8220
DOI: 10.3390/s21020518