Highly Flexible and Durable Thermoelectric Power Generator Using CNT/PDMS Foam by Rapid Solvent Evaporation (Small 5/2022)
نویسندگان
چکیده
Foam Thermoelectric Generators An elastic and durable thermoelectric generator using carbon nanotubes/polydimethylsiloxane foam shows stable power generation in the real stress environment of an automobile engine, where compressive vibrational stresses occur continuously irregularly. The proposed approach by Song Yun Cho, Bumjoon J. Kim, co-workers (article number 2106108) will significantly contribute to self-powered wearable automotive applications.
منابع مشابه
Developmemnt of Flexible Thermoelectric Generator Using Fpcb
We proposed the flexible thermoelectric generator (TEG) using double side FPCB (flexible printed circuit boards). The proposed flexible thermoelectric generator has the unique vertical structure. The heat of the flexible thermoelectric generator flows vertically via plated through hole (PTH). The n-type (Bi-Te) and p-type (Sb-Te) thin films are deposited by the co-evaporator and patterned using...
متن کاملMicro Solar Thermal Power Harvesting using Thermoelectric Generator
ABSTRACT The use of a thermoelectric generator (TEG) in generating useful power from solar thermal energy is demonstrated. This device represents a portable and autonomous power generation system operating from solar power, capable of powering micro/nano systems. The TEG was integrated with a micro solar thermal collector plate to enhance the thermal radiation absorption capacity of the hot sid...
متن کاملScreen printed flexible Bi2Te3-Sb2Te3 based thermoelectric generator
This paper reports the fabrication and testing of Bismuth Tellurium (Bi2Te3) – Antimony Tellurium (Sb2Te3) based thermocouples using screen printing technology. In this study, screen printable thermoelectric pastes were developed and the transport properties of cured material were measured. The dimension of each planer thermoleg is 39.3 mm × 3 mm with a thickness of 67 μm for Bi2Te3 leg and 62 ...
متن کاملFlexible Micro Thermoelectric Generator based on Electroplated Bi2Te3
We present and discuss the fabrication process and the performance of a flexible micro thermoelectric generator with electroplated Bi2+xTe3-x thermocouples in a SU-8 mold. Demonstrator devices generate 278μWcm at ∆Tmeas=40K across the experimental set up. Based on model calculations, a temperature difference of ∆TG=21.4K across the generator is assumed. Due to the flexible design and the chosen...
متن کاملHollow Colloidosomes Prepared Using Accelerated Solvent Evaporation
We demonstrate a new, scalable, simple, and generally applicable two-step method to prepare hollow colloidosomes. First, a high volume fraction oil-in-water emulsion was prepared. The oil phase consisted of CH2Cl2 containing a hydrophobic structural polymer, such as polycaprolactone (PCL) or polystyrene (PS), which was fed into the water phase. The water phase contained poly(vinylalcohol), poly...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Small
سال: 2022
ISSN: ['1613-6829', '1613-6810']
DOI: https://doi.org/10.1002/smll.202270020