High Temperature Sliding Wear of NiAl-based Coatings Reinforced by Borides
نویسندگان
چکیده
منابع مشابه
Platinum-Based High Temperature Selective Absorber Coatings
In photothermal energy conversion the absorbed solar flux is converted to heat which is then used directly or is converted to mechanical or electrical energy. Efficient receiver design requires that thermal losses from the absorber surface, which is the hottest element of the system, be minimised. Receivers are, in fact, generally classified according to their operating temperature ( I , 2). Th...
متن کاملMicro-Structures and High-Temperature Friction-Wear Performances of Laser Cladded Cr–Ni Coatings
Cr-Ni coatings with the mass ratios of 17% Cr-83% Ni, 20% Cr-80% Ni and 24% Cr-76% Ni were fabricated on H13 hot work mould steel using a laser cladding (LC). The surface-interface morphologies, chemical elements, surface roughness and phase composition of the obtained Cr-Ni coatings were analysed using a scanning electron microscope (SEM), energy disperse spectroscopy (EDS), atomic force micro...
متن کاملMicrostructures and Wear Performance of PTAW Deposited Ni-Based Coatings with Spherical Tungsten Carbide
The Ni-based coatings with different content of spherical tungsten carbide were deposited by plasma transfer arc welding (PTAW) method on 304 austenitic stainless steel sheets in this study. The microstructure and wear property of spherical tungsten carbide particle reinforced composite coatings were investigated by means of optical microscope, scanning electron microscope (SEM), X-ray diffract...
متن کاملPolyurethane Coatings Reinforced by Halloysite Nanotubes
The pencil hardness of a two-component polyurethane coating was improved by adding halloysite nanotubes to the recipe at a weight fraction of less than 10%. The pencil hardness was around F for the unfilled coating and increased to around 2H upon filling. It was important to silanize the surface of the filler in order to achieve good coupling to the matrix. Sonicating the sample during drying a...
متن کاملHigh Temperature Internal Friction in NiAl Single Crystals
The internal friction of high-purity NiAl single crystals was investigated utilizing a low-frequency subresonance torsion a p m . Above lOOOK the damping increases strongly up to Q-' =0.3 at 1400K. The activation enthalpy of this viscoelastic relaxation depends on the composition and shows the highest value (2.8eV) for stoichiometric NiAl. The results are discussed in terms of diffusionantrolle...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Science
سال: 2016
ISSN: 2029-7289,1392-1320
DOI: 10.5755/j01.ms.22.1.8093