High Power YAG Laser Processing. High Power YAG Laser Application in Heavy Industries.
نویسندگان
چکیده
منابع مشابه
emittance control in high power linacs
چکیده این پایان نامه به بررسی اثر سیم پیچ مغناطیسی و کاوه یِ خوشه گر با بسامد رادیویی بر هاله و بیرونگراییِ باریکه هایِ پیوسته و خوشه ایِ ذرات باردار در شتابدهنده های خطیِ یونی، پروتونی با جریان بالا می پردازد و راه حل هایی برای بهینه نگهداشتن این کمیتها ارایه می دهد. بیرونگرایی یکی از کمیتهای اساسی باریکه هایِ ذرات باردار در شتابدهنده ها است که تاثیر قابل توجهی بر قیمت، هزینه و کاراییِ هر شتابدهند...
High-power diode-pumped Q-switched Er3+:YAG single-crystal fiber laser
We describe an efficient laser emission from a directly grown Er:YAG single-crystal fiber that is resonantly pumped using a continuous-wave (CW) laser diode at 1532 nm. In a longitudinal pumping, it emits 12.5 W at 1645 nm with a slope efficiency of 32%, which is the highest ever reported for a directly grown Er:YAG single-crystal fiber laser. Using an off-axis pumping scheme, CW output powers ...
متن کاملHigh power passively Q-switched ytterbium fiber laser with Cr(4+):YAG as a saturable absorber.
We report an efficient high-peak-power and high-average-power passively Q-switched ytterbium fiber laser with a Cr(4+):YAG crystal as a saturable absorber in an external-resonator configuration. At an incident pump power of 17.5 W, the passively Q-switched fiber laser produces an average power greater than 6.2 W with a pulse repetition rate of 48 kHz. The output pulses noticeably display a mode...
متن کاملneodymium/YAG laser trabeculotomy
Laser trabeculotomies produced by directing a pulsed neodymium/YAG laser beam at specimens of human anterior chamber angle obtained post mortem or after enucleation were studied by light microscopy and by scanning and transmission electron microscopy to assess the dimensions of the openings created in the trabecular meshwork, their penetrance to the canal of Schlemm, and the extent or absence o...
متن کاملstate compact high repetition rate ked Cr 4 + : YAG laser
operated stably after more than 500h. In conclusion, we obtained a nearly round FFP in the 650nm band wavelength using the S3-laser. The laser had good I-L characteristics and good reliability at lOmW and 60°C. We consider that the laser could be of use as a light source in optical disk systems. and TERAMOTO, I.: 'Novel technology for formation of a narrow active layer in buried heterostructure...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Review of Laser Engineering
سال: 1994
ISSN: 0387-0200,1349-6603
DOI: 10.2184/lsj.22.870