High-low refractive index stacks for broadband antireflection coatings for multijunction solar cells

نویسندگان

چکیده

Abstract Antireflection coatings are an interesting challenge for multijunction solar cells due to their broadband spectrum absorption and the requirement of current matching each subcell. A new design cell antireflection is presented in this work which alternative high low index materials used minimize reflection a (300–1800 nm). We compared short circuit density high-low refractive stacks designs with optimum double-layer by considering two optical combinations (MgF2/ZnS Al2O3/TiO2) AM0 AM1.5D spectra. The calculations demonstrate that lattice-matched triple-junction inverted metamorphic quadruple-junction cells, outperform coatings. philosophy requires no because only exhibits excellent performance angle these slightly better than classical double-layers whereas analysis thickness sensitivity shows small deviations from deposition targets impact Finally, some technical solutions depositing multilayers discussed.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Nanoporous Films with Low Refractive Index for LargeSurface BroadBand AntiReflection Coatings

Nowadays, nanoporous films are widely employed in biochemical applications or in optophotonic devices such as displays, solar cells, or light-guiding systems. In particular, the technological feasibility of nanoporous layers with low refractive indices has recently enabled the development of high-efficiency anti-reflection coatings. In this paper, we report on hybrid polymer nanoporous films th...

متن کامل

Nanowire-based multifunctional antireflection coatings for solar cells.

Organic (P3HT/PCBM) solar cells are coated with ZnO nanowires as antireflection coatings and show up to 36% enhancement in efficiency. The improvement is ascribed to an effective refractive index which results in Fabry-Perot absorption bands which match the polymer band-gap. The effect is particularly pronounced at high light incidence angles. Simultaneously, the coating is used as a UV-barrier...

متن کامل

Design Multilayer Antireflection Coatings for Terrestrial Solar Cells

In order to analyze the influence of methods to design antireflection coatings (ARCs) on reflectivity of broadband solar cells, we provide detailed analyses about the ARC coupled with a window layer and the refractive index dispersion effect of each layer. By multidimensional matrix data simulation, two methods were employed to measure the composite reflection of a SiO2/ZnS double-layer ARC wit...

متن کامل

Design of multilayer antireflection coatings made from co-sputtered and low-refractive-index materials by genetic algorithm.

Designs of multilayer antireflection coatings made from co-sputtered and low-refractive-index materials are optimized using a genetic algorithm. Co-sputtered and low-refractive-index materials allow the fine-tuning of refractive index, which is required to achieve optimum anti-reflection characteristics. The algorithm minimizes reflection over a wide range of wavelengths and incident angles, an...

متن کامل

High Refractive Index Polymer Coatings for Optoelectronics Applications

The performance of many solid-state devices including emissive displays, optical sensors, integrated optical circuits, and light-emitting diodes can be improved by applying a transparent high refractive index coating (≥ 1.65) onto the light-emitting or light-sensing portion of the device. Ideally, the coating should combine the excellent durability and easy deposition of a spin-applied polymer ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Solar Energy

سال: 2021

ISSN: ['0375-9865', '1471-1257', '0038-092X']

DOI: https://doi.org/10.1016/j.solener.2021.01.060