High-entropy pyrochlores with low thermal conductivity for thermal barrier coating materials
نویسندگان
چکیده
منابع مشابه
Thermal Conductivity of a Zirconia Thermal Barrier Coating
The conductivity of a thermal-barrier coating composed of atmospheric plasma sprayed 8 mass percent yttria partially stabilized zirconia has been measured. This coating was sprayed on a substrate of 410 stainless steel. An absolute, steady-state measurement method was used to measure thermal conductivity from 400 to 800 K. The thermal conductivity of the coating is 0.62 W/(m⋅K). This measuremen...
متن کاملEvaluation of Thermal Barrier Coating in Low Cycle Fatigue Life for Exhaust Manifold
This paper presents low cycle fatigue (LCF) life prediction of a coated and uncoated exhaust manifolds. First Solidworks software was used to model the exhaust manifolds. A thermal barrier coating system was applied on the tubes c of the exhaust manifolds, consists of two-layer systems: a ceramic top coat (TC), made of yttria stabilized zirconia (YSZ), ZrO2-8%Y2O3 and also a metallic bond coat ...
متن کاملHigh Frequency Circuit Materials With Increased Thermal Conductivity
Thermal management has always been a major concern in the design of high frequency, high power electronic devices. Historically, in most power amplifier designs, the vast majority of the power dissipated is from the high power field effect transistors (FET) themselves. In these cases, the high power dissipation requires direct attachment of the FETs to a finned heat sink, or conduction through ...
متن کاملEvaluation of thermal conduction anisotropy on Thermal Barrier Coating
The microstructural analysis of Thermal Barrier Coatings, deposited according to the Air Plasma Spray technology, furnishes information according which a strong orthotropic thermal conductivity is expected to be measured for such a material. Pulsed experiment with a localized heating source and thermographic temperature recording, permit to evaluate both the in-depth and in-plane components of ...
متن کاملHigh-temperature degradation of plasma sprayed thermal barrier coating systems
Thermal barrier coating systems (TBCs) are used in gas turbines to prevent high-temperature degradation of metallic materials in the combustor and turbine. One of the main concerns regarding TBCs is poor reliability, and accurate life prediction models are necessary in order to fully utilise the beneficial effects of TBCs. This research project aims at developing deeper understanding of the deg...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Advanced Ceramics
سال: 2019
ISSN: 2226-4108,2227-8508
DOI: 10.1007/s40145-019-0342-4